FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

International Harvester / Farmall 3688 Parts

Category: Engine Parts

[Categories] [All 3688 Parts] [All Farmall Models]

2nd Speed Drive Gear - For International / Farmall tractor models 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756, 2826, 2856, 3088, 3288, 3688, 21456, Replaces International OEM number 528672R1, 32 Teeth, 25 Degrees, (Item #: 111940) $146.00

Camshaft - This New Camshaft is used on 6 Cylinder 400 Series Diesel engines. Replaces original part number 1802337C91 (Item #: 113417, Ref: 1802337C91) $279.00

Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92) $295.00

No
Picture
Flywheel - With Ring Gear. For 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166, 4186, 6388 with 414, 436 or 466 Engines and 14 inch clutch. (Item #: 103901, Ref: R2322) $500.00

Flywheel With Ring Gear - This Flywheel with Ring Gear is used with 14 inc clutches on 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166, 4186. (Item #: 103901, Ref: 672215C91) $500.00

Flywheel With Ring Gear - This New Flywheel includes installed 341604R1 Ring Gear. It is used on Hydro 100, Hydro 186, 766, 886, 966, 986, 1066 (with hydostatic transmission), 3488, 3688. It is used with D360, D436, DT414, DT436, DT466 engines. Replaces 672211C91 (Item #: 110253, Ref: 672211C91) $600.00

No
Picture
Gear Pump Conversion Kit less Pump - For International / Farmall tractor models Hydro 186, 986, 1086, 1486, 1586, 3488, 3688, This kit is used to convert Power Priority (Piston pump) to Constant Displacement (Gear pump), Additional Handling and Oversize Fees Apply To This Item, (Item #: 111874) $1749.01

Push Rod - Used in IH diesel engines: D414, DT414, DT466B, DT466C, DTI466C, D436, DT436, D466, DT466, Early DT466B, Early DT466C, this part replaces OEM numbers 675621C1, 675621C2. These engines are found in Hydro 100 ``Hydro 186, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 5088, 5288, 5488, 6388, 6588, 6788. This push rod is 11-1/4 inches long. (Item #: 108771) $16.30

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.70

Ring Gear, Flywheel - This ring gear has 132 teeth and measures 16.680 inch outside diameter, 15.485 inch inside diameter, .610 inch wide. For tractor models (1026 diesel), (1066 hydro or diesel), (21026, 2826, 2856, 3088, 3288 diesel), (3488, 3688 hydro, diesel), (706, 756, 766, 786 diesel), (806 with D361), (826, 856, 886, 966, 986, Hydro 100, Hydro 186 diesel). (Item #: 103900, Ref: 341604R1) $47.00

Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $248.00

No
Picture
Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $181.24

Transmission Gear - 1st - For International / Farmall tractor models Hydro 100, 756 (Farmall s/n 173636-later, International s/n 8425-later), 766, 786, 826, 856 (Farmall s/n 27287-later, International s/n 9493-later), 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2756 (Farmall s/n 173636-later, International s/n 8425-later), 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4156, 4166, 4186, 6388, 6588, 21456, Replaces International OEM number 406473R1, Outside Teeth: 27, Inside Teeth: 25, (Item #: 108863) $152.00

Transmission Shaft - For International / Farmall tractor models 826, 856, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 2826, 2856, 3388, 3588, 3688 (all with or without TA), 3788, 6388, 6588, 6788, 21456 (all with or without TA), Replaces International OEM number 529434R2, 529282R2, 529282R1, Splines: 20 / 23, (Item #: 117484) $421.00

Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $6.50

Valve Tappet 1.12 Inch - These tappets are used in the following engines: DTI466C, (DT436 Engine serial number 121624>), (DT436B Engine serial number 121624>), (DT466 Engine serial number 140087>), (DT466B Engine serial number 140087>), DT466C, (D414 Engine serial number 155806>), (D436 Engine serial number 121624>), (D466 Engine serial number 140087>). They have a 1.12 inch diameter. Replaces original part number 1802340C1. (Item #: 156082, Ref: 1802340C1) $12.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories] [All 3688 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy