FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

John Deere 4430 Parts

Category: Steering

[Categories] [All 4430 Parts] [All John Deere Models]

Axle Knee Extension, Left Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces AR80193, AR59194, Casting numbers R64388, R49608 (Item #: 173486, Ref: AR80193) $676.00

Axle Knee Extension, Right Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces R80192, AR59194, AR59214, Casting numbers R64387, R49607, R53221 (Item #: 173494, Ref: AR80192) $719.00

Center Steering Arm - For tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Center Steering Arm replaces R50769. (Item #: 104965, Ref: R61159) $202.00

Front Axle Pin Rear Bushing - The measurements on this bushing are: 1.690 inches outside diameter, 1.500 inches inside diameter, and 2.000 inch long. It is used on John Deere 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces R65827 (Item #: 109837, Ref: R65827) $11.90

Front Axle Pivot Pin - Used on John Deere 1630, 2840, 2940, 2950, 2955, 4030, 4040, 4050, 4055, 4230, 4430, this pin measures A - 4.250 inches long, 1.500 inches in diameter. Replaces B2700R, T29205. (Item #: 108531, Ref: T29205) $20.90

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $66.00

No
Picture
Packing - Washer, R39304 - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2440 (s/n 340999-earlier), 2550, 2555, 2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3640 (s/n 341000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8630, 8640, 8850, Compatible with John Deere Construction and industrial models 415B, 515B, Replaces John Deere OEM number R39304, (Item #: 117267) $3.40

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Item #: 113859, Ref: R34348) $60.00

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152) $42.98

Pump Shaft - Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Item #: 113862, Ref: R79154) $73.98

Pump Shaft - Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Item #: 113861, Ref: R79156) $77.98

No
Picture
Spindle - Right Hand/Left Hand - For John Deere tractor models 4230, 4430, Replaces John Deere OEM number AR69323, Dimension A: 14.687", Dimension B: 1.750", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102223) $221.00

Spindle Bushing - Used on John Deere models: 2955, 3055, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810, 310A (below serial number 700147), 310B (below serial number 700147), 401D (below serial number 700147), 480C (below serial number 700147). 1.750 Inside Diameter. Price shown is for each, sold only in multiples of 2 items. Replaces R49835 (Item #: 109646, Ref: R49835) $10.20

Spindle, Hi-Crop LH and RH - Used on Hi-Crop Axles, the measurements on this spindle are: 28.625 inches, B - 1.750 inches, C - 1.968 inches, D - 1.312 inches. Used on the Hi-Crop variants of John Deere models: 4050, 4240, 4250, 4255, (4430 Also Order 1 Each Of JLM104948 and LM1049 bearings), 4440. Parts associated with this spindle are: R49835 Bushings, R49838 Thrust washer, R49841 Hub, WBKJD8 Wheel Bearing Kit, each sold individually. (Item #: 104780, Ref: AR82754) $616.00

Spindle, Left or Right Side - Has 14.687 x 1.75 inch Splined Upright Shaft. Inner bearing - 1.968 inches, Outer bearing - 1.312 inches. Used Left or Right side. 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7200 (to s/n 010920), 7400, 7600, 7610 (to s/n 010664), 7700, 7710 (to s/n 011300), 7800, 7810 (to s/n 013023). Uses 2 - R49835 Bushing, 2 - R49838 Thrust Washers, WBKJD8 Wheel Bearing Kit. Replaces: AR81954, RE57643. (Item #: 102224, Ref: AR81954) $227.00

Steering Arm - Left Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces OEM R61153 (Item #: 102699, Ref: R3028) $229.62

Steering Arm - Right Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 1.75 inch spindles with 6 splines. Replaces OEM R61152 (Item #: 102706, Ref: R3029) $107.00

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875) $60.00

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $66.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.90

Tie Rod - Tie rod end, inner, threaded, right hand threads, 3-7/8 to center of post. For all adjustable front axles on tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 102257, Ref: AR63588) $27.10

Tie Rod - Tie rod end, outer, drilled, 8 holes, 16-1/8 to center of post. For regulard and Hi-Crop adjustable front axles. Tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 102255, Ref: TP-AR63592) $38.00

Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Narrow Row Wide Front End. (Item #: 104872, Ref: AR44335) $103.00

Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Extra Wide Row Front Axle. Tie Rod Assembly. (Item #: 102257, Ref: AR63588) $27.10

Tie Rod Assembly - For tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all Hi-Crop Models. (Item #: 104875, Ref: AR44338) $103.00

Tie Rod Assembly - For tractor models 4640 SN# up to 2436 with power front axles, (3630, 4040, 4230, 4250, 4430, 4440 all with power front axles. (Item #: 104886, Ref: AR44339) $191.00

Tie Rod Assembly, Complete - Assembly consisting of AR63588 Inner Tie Rod, R54965 Tie Rod Tube, R28023 Clamp, AR63593 Long Tie Rod plus hardware. Used on extra wide front ends. This front end is found on some of the following John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 104874, Ref: AR44337) $168.00

Tie Rod Clamp - For John Deere tractor models 4040, 4230, 4250, 4430, 4440 (All with Power Front Axle), 4555, 4560, 4630, 4640, 4755, 4760, Replaces John Deere OEM number M2301T, (Item #: 104884) $4.40

Tie Rod End - Short threaded, A= 4.187", B= 1.00", 16 thread. Used on 4640 Serial Number below 2436 WITH POWER FRONT AXLES), (3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD) Replaces AR63590. (Item #: 102271, Ref: D8NN3289BB) $22.20

Tie Rod End - This Tie Rod End is 22.500 Inches from the center of the ball joint to the end of the rod. The Rod is 1.116 inches in diameter. Used on (4640 Serial number below 2436 WITH POWER FRONT AXLES), 3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD. Replaces AR63587. (Item #: 102260, Ref: AR63587) $45.00

Tie Rod Inner - 4.187 Long 1.00 diameter with RH Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle (Item #: 102271, Ref: R3834) $22.20

No
Picture
Tie Rod Outer - 14.250 Long .995 diameter with 7 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle. (Item #: 102254, Ref: R3831) $46.00

Tie Rod Outer - 16.00 Long 1.00 diameter with 8 Holes For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Regular or Hi-Crop Front Axle (Item #: 102255, Ref: R3048) $38.00

Tie Rod Outer - 18.750 Long .990 diameter with 9 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Extra Wide Front Axle. (Item #: 102256, Ref: R3049) $49.00

Tie Rod Outer - 22.50 Long 1.116 diameter with 8 Holes For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle. (Item #: 102260, Ref: R3050) $45.00

Tie Rod Tube - Used on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Verify part number or measurements before ordering. These tractors all came with more than one front end. Measures 17.500 inches long. One end is 7/8 X 18 right hand thread. The other side is 1.015 inches inside diameter. Replaces R54963, R54966, AR44338. (Item #: 102258, Ref: R54963) $29.60

Tie Rod Tube - Verify measurements before ordering. The models listed were built with more than one front end. This part measures 15.375 inches Long, 7/8 x 18 RH Thread on one end and 1.015 inches inside diameter on the other. Used on John Deere 4030, 4040, 4050, 4055, 4230, 4250, 4255, 4430, 4440, 4450, 4455 (Item #: 104873, Ref: R54964) $31.00

Tie Rod Tube - Used on Extra Wide Row Front Ends, this tube measures 20.500 inches long with one end 7/8 X 18 RH Thread, and the other 1.015 inches inside diameter. The front end that this tube is used on can be found on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. (Item #: 102259, Ref: R54965) $56.00

Tie Rod Tube - Used on some Power Front Ends and some Regular Wide front ends, this tie rod tube measures 17.375 inches over all with 1 X 16 RH Thread on one side and 1.143 inches inside diameter on the other. All of the tractors listed were produced if several front end variants. Verify measurements or part number before order. For John Deere models: 4040, 4230, 4240, 4250, 4430, 4440, 4560, 4630, 4640, 4650, 4755, 4760 (Item #: 102261, Ref: R55075) $31.00

Tie Rod Tube - 17.50 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Regular Front Axle (Item #: 102258, Ref: R3044) $29.60

No
Picture
Tie Rod Tube - 15.375 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle (Item #: 104873, Ref: R3832) $31.00

Tie Rod Tube - 20.50 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Extra Wide Front Axle (Item #: 102259, Ref: R3045) $56.00

Tie Rod Tube - 18.375 Long .875 diameter with Internal Threads For 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Hi-Crop Front Axle (Item #: 184751, Ref: R3833) $49.00

Tie Rod, Long - Tie rod end, outer, drilled, 9 holes, 18-3/4 to center of post. For wide adjustable front axles. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. (Item #: 102256, Ref: AR63593) $49.00

Tie Rod, Outer - Tie rod end, LH or RH (outer), 14-1/4 inches, 0.995 inches shaft diameter with 7 through holes. Used on adjustable narrow front axles. Tractors: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. (Item #: 102254, Ref: AR63591) $46.00

Wheel Half Sleeve, Keyed - 92 mm - For John Deere tractor models 4430, 4440, 4520, 4620, 5010, 5020, 6030, 8430, 8630, Replaces John Deere OEM number AR83354, R35303, Keyed Half, Includes Dowels, (Item #: 109094) $160.00

Universal Parts and Accessories
Category: Steering

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $16.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $49.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.50

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $11.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $17.50

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $19.20

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $10.30

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $7.90

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.30

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 4430 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy