FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

John Deere 2510 Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Pad - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number R90090, AR38048, R38024, Requires 4 Rivets - Not Included, For rivets use Item #: 111444, (Item #: 111362) $15.00

$John Deere 2510 Brake Pads for Disc\Rotor Type Brakes$
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Item #: 105607, Ref: AR28487) $17.50

Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R) $9.00

No
Picture
Brake Valve - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999), 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999), 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number R26369, (Item #: 117229) $2.98

Planetary Brakes Clutch Pack Plate - For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission), Replaces John Deere OEM number R48236, R33872, O.D.: 11.620", I.D.: 9.700", (Item #: 117041) $36.98

Clutch

No
Picture
Clutch Alignment Tool - 1-1/16" 16 spline, 1-11/16" 16 spline, .67" pilot. For tractor models 2510, 3010, 2520, 3020. (Item #: 114666, Ref: S.70914) $45.00

Clutch Bearing - Release bearing for Models 1010, 2510, 2520, 3020, 40, 4000, 4010, 4020, 420 INDUST/CONST, 430 INDUST/CONST, 4320 COMPACT TRACTOR, 440 SKIDDER, 450 RIDING MOWER, 450B INDUST/CONST, 450C INDUST/CONST, 450D INDUST/CONST, 450E INDUST/CONST, 450G INDUST/CONST, 455, M, MT. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces AM3983T. (Item #: 107007, Ref: N1087) $19.80

No
Picture
Clutch Disc - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number RE29773, AR38498, Clutch Size: 11", Clutch Hub: 1-1/16", Clutch Spline: 16, Clutch Center: Solid, Clutch Type: Woven, (Item #: 114018) $159.00

Clutch PTO Plate Return Spring - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 7020, Compatible with John Deere Construction and industrial models 500, 500C, 600, Replaces John Deere OEM number R26659, R48618, Sold Each, (Item #: 114093) $2.40

Pilot Bearing - .6693" I.D. For tractor models 1010, 1020, 105, (1120 Canada single ind. PTO), (1130 Europe single ind. PTO), 1520, 1530, 2010, 2020, 2030, 2040, (2150 reverser), (2155 reverser), 2240, (2355 reverser), 2440, 2510, 2520, (2555 reverser), 2630, 2640. Replaces JD9449, JD8504, AA61722, AT23188, JD29980, JD7180, JD8535 (Item #: 107933, Ref: C5NN7600A) $3.70

No
Picture
Release Bearing - For tractor models 2510, 2520, 3010, 3020. (Item #: 121891, Ref: TP-AR41794) $25.30

Release Bearing - I.D. 2.557", O.D. 3.936", Thickness .704". For tractor models 1450, 1650, 2510, 2520, 3010, 3020, 5010, 5020, 5200, 5210, 5215, 5220, 5300, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5515, 5520, 5605, 5615, 5705, 5715, 6030, 7520. (Item #: 107477, Ref: AR26845) $34.00

Cooling System

Radiator - For 2510, 2520, 4219DF, 4276D. Radiator. (Item #: 119610, Ref: AR38551) $400.00

Radiator Cap - For tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Item #: 125561, Ref: R27209) $21.10

Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 gas. For tractor models 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99. (Item #: 150843, Ref: R38311) $21.40

Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 diesel, 2520. For 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99 (Item #: 159695, Ref: R38313) $19.10

No
Picture
Thermostat - 190 degree. For tractor models 1020, 1120, 1630, 1830, 2020, 2030, 2040, 2120, 2240, 2440, 2510, 2520, 930. (Item #: 167528, Ref: AT22963) $8.10

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $8.10

Thermostat Housing Cover - Used on gas engines. For tractor models 1020, 1520, 1830, 2020, 2030, 210C, 2130, 2440, 2510, 2520, 300, 300B, 301, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410. (Item #: 159570, Ref: T20317) $18.90

Water Pump - For tractor models 450, 2510 Gas, 480A and 480B up to Serial Number 193099. Replaces AT29617-R, R29520. Casting# RT29520 Or T23629 (Item #: 118462, Ref: AT29617-R) $162.00

Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Item #: 107989, Ref: RE25043) $164.00

Water Pump Impellor - For tractor models 1020, 1120, 1520, 1530, 1640, 2020, 2040, 2040S, 2120, 2440, 2510, 2630, 2640, 3300, 5105, 5205, 5210, 5220, 5310, 5310N, 5320, 5320N, 820, 830, 8875, 920, (2240 SN# 350000 and up), (2140 SN# 430000 and up). (Item #: 123606, Ref: T30897) $11.00

Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628) $91.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For models 610C, 624G, 640, 640E, 640G, 644A, 644C, 646, 646B, 646C, 648E, 648G, 655, 655B, 670, 670B, 672B, 690, 690A, 690B, 690ELC, 710B, 710C, 710D, 740, 740A, 740E, 740G, 748E, 750, 750B, 750C, 755, 755A, 755B, 762A, 762B, 790ELC, 850C, 1020, 1520, 1530, 2020, 2030, 2280, 2360, 2420, 2510, 2520, 2630, 3010, 3020. (Item #: 164008, Ref: AR101549) $10.10

Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Item #: 173137, Ref: R29521) $222.00

Decals and Emblems

Be Careful Plate - This Be Careful Plate is used on John Deere Tractors, 1961-1972. (Item #: 184329, Ref: R4475) $16.10

No
Picture
Decal Set, Complete - For model 2510 model numbers are vinyl cut. (Item #: 183310, Ref: R4702) $68.00

Hood Ornament - For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Item #: 108412, Ref: AR28047) $35.00

Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair.Replaces: AR28048, AR28049 (Item #: 101968, Ref: R2533) $164.00

Syncro-Range and Power Shift Decal Set - This Mylar set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Item #: 115031, Ref: AR52393) $49.00

Drive Train

Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 119616, Ref: R31026) $94.00

Drum, Reverse Range - For tractor models 2510, 2520, 3010, 3020, 4010, 4000, 4020. Replaces R31027, R27726 and R52499. (Item #: 124958, Ref: R52499) $82.00

Gear Shift Lever - For tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4000, 4320. Replaces R27633. (Item #: 121581, Ref: R46285) $121.00

Gear Shift Lever, Straight - For tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. Replaces R29936, R53817, T28809, 34H251, AL32791 (Item #: 152054, Ref: AL32791) $31.00

Gear Shift Pivot - This gear shift pivot Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 5010, 5020. 6030 Tractors. It also has applications in industrial applications. It R53247, AR26360, R47203. Pivots Marked R26185 (Item #: 152195, Ref: R53247) $21.00

Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 serial number up to 015963 syncro range), (4230 syncro range up to serial number 037595). Replaces R26074, R33383. (Item #: 127291, Ref: R33383) $102.87

Shift Collar, Reverse Range - For tractor models (2510, 2520, 3020 all with syncro drive). (Item #: 156886, Ref: R33480) $101.00

Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro and quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 150072, Ref: R31028) $107.00

Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Item #: 126760, Ref: R33512) $180.00

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Item #: 110864, Ref: AR75603) $15.80

Electrical System

Accessory Relay - This accessory relay fits the following tractor models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, and 2630. It has 5 pins and is made to accommodate 12 volt systems. Replaces part number: AR74411. (Item #: 115683, Ref: AR74411) $13.80

Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Item #: 115792, Ref: AR26622) $13.80

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Item #: 164460, Ref: TP-AR54484) $37.00

Condenser - Condenser. Repalces IBB2042-SS-1.For tractor models using Presto-Lite Distributor. Replaces AT14468 for Tractors using Delco Distributors and replaces AR12000, AT14873 or AT15929 For Wico Distributors. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W. Balers 40, 45, 55, 65, 95, 105. Combines 99, 299. Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111194, Ref: AT14684) $4.60

Condenser - Wico X Magneto - For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520, 3020, 3300, 4030, 6600, Compatible with John Deere Combine (s) 45, 55, 95, 105, Compatible with John Deere Harvester (s) 699, Replaces John Deere OEM number AR12013, Replaces Wico manufacturer number X5614, (Item #: 111100) $13.98

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 3300, 400, 401, 401B, 401C, 410, 450, 480, 480A, 480B, 24A, 440, 440A, 440B, 1010, 2010, 2020, 2030, 2510, 2520 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564. (Item #: 105566, Ref: AT14692) $16.00

Distributor Cap Clip - For John Deere tractor models 1010, 1020, 1520, 2010 (s/n 42001-later), 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 3300, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT14679, (Item #: 112081) $23.50

Distributor Dust Cover - For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 3300, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT14682, Prestolite distributor number (s): IBT4101, IBT4301, IBT6101, (Item #: 109896) $27.50

Distributor Point Set - This Point Set is for a WICO DB Distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Item #: 113431, Ref: AR12003) $29.80

Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873. (Item #: 172995, Ref: AR12014) $22.10

Distributor, Rebuilt - Complete remanufactured distributor for John Deere 1010, 2010, 2020, 2030, 2510 with Prestolite distributor IBT4101R IBT-4101R, IBT4101L, IBT-4101L. John Deere part number AT14384. This is a slotted shaft distributor. A refundable $125.00 core charge will be added to your order. (Item #: 205329, Ref: IBT4101R) $295.01

Distributor, Rebuilt - Complete remanufactured distributor for John Deere 2020, 2030, 2510, 2520 with Prestolite distributor IBT4101U IBT-4101U. John Deere part number AT21351. This is a gear driven distributor. A refundable $125.00 core charge will be added to your order. (Item #: 203567, Ref: IBT4101U) $295.01

Electronic Ignition Conversion Kit, 12 volt negative ground - 4-cylinder engine. For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt negative ground system with a Prestolite distributor. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. Used with the following distributors: IBT-4702, IBT-4709, IBT-4707, IBT-4706, IBT-4705, IBT-4701, IBT-4501, IBT-4405, IBT-4404, IBT-4403A, IBT-4105A, IBT-4106A, IBT-4402, IBT-4001G, IBT-4102A (Item #: 105090, Ref: 1542) $170.00

No
Picture
Electronic Ignition Conversion Kit, 12 volt negative ground - For tractor models 1010, 2010, 2030, 2510, 2520 with Distributor number IBT-4101, IBT-4101B, IBT-4101H, IBT-4101L, IBT-4101N, IBT-4101R, IBT-4101S, IBT-4101U. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt Negative ground system. (Item #: 108439, Ref: 1544) $205.00

Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt positive ground system, use with Prestolite distributor using the "A" type rotor which is "T" Shaped. CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. (Item #: 108152, Ref: 1542P12) $162.00

Ignition Point Set, Presto-Lite Distributor - Pre-assembled point set For tractor models using Presto-Lite Distributor. Replaces Prestolite IBP2040L. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111191, Ref: AT21062) $7.40

Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Item #: 121144, Ref: AR39505) $23.80

Ignition Tune-up Kit Less Rotor - Ignition kit, less rotor. Contains: Points, gauge, condenser. Pre-assembled points using Prestolite distributors. For: 1010, 1020, 2010, 2020, 2510, 323W. Baler; 40, 45, 55, 65, 95, 105. Combines; 99, 299. Cotton Pickers; 12. Forage harvester; 600, 700. Hi-Cycles, TA145, 217 Power Units; 215, 215A windrowers. (Item #: 105563, Ref: ATK11PL) $9.60

Magneto Tune-up Kit - Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Item #: 105594, Ref: 569632) $50.00

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For tractor models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Item #: 164460, Ref: TPAR54484) $37.00

Rotor - Rotor. Replaces Prestolite IBT1016.For tractor models using Presto-Lite Distributor.For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111188, Ref: AT14680) $11.40

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $240.00

Starter - 12 volt, clockwise rotation, 13 tooth. For tractor models 1350, 1445F, 1550, (1630 1973-82), (1640, 1640F SN# 126012 and up), 1745F, 1750, 1750V, (1830 1973-82), (1840 1970-82), (1840, 1840F SN# 126012 and up), 1845F, 1850, 1850F, 1850V, 1950, 1950F, (2040 1976-82 with 3-164 dsl), 2040, (2040F, 2040S SN# 126012 and up), (2140 1974-82), (2140 SN# 126012 and up), 2155, 2250, 2250F, 2345F, (2355 1987-92), (2440 1976-82 with 4-219 dsl), 2450, 2450F, (2510 1965-68 with 4-203 dsl), (2520 1967-73 with 4-219 dsl), (2555 1987-92 with 4-239 dsl), 2650, 2650F, (2750 1983-86 with 4-239 dsl), (2755 1987-92 with 4-239 dsl), (2840 1977-79 with 6-329 dsl), 2850, 2855N, (2940, 1980-84 with 6-359 dsl), (2950 1983-86 with 6-359), (2955 1987-92 with 6-359 dsl), (3030 1979-82), (3040 1980-84), 3050, (3055 1992 with 6-359 dsl), (3130 1979-82 6-359 dsl), (3140 1970-82 with 6-359 dsl), (3140 SN# 126012 and up). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044) $147.00

Starter - This is a 12 volt, Delco style starter OSGR with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $202.15

Starter Solenoid - Delco Starter Solenoid Assembly, flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 820, 1010, 2010, 2510, 3010, 3020, 4010, 4020 TP-AR68304 (Item #: 105675, Ref: 1047083M91) $21.70

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $14.40

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Item #: 105708, Ref: AR78298) $39.00

Engine Bearings

Bearing - For John Deere tractor models 2510, 2630, 2640, Compatible with John Deere Combine (s) 6602 (Hillside), Compatible with John Deere Header (s) 78, 88, 120, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 278, 288, 483, Compatible with John Deere Hay Cutting (s) 1207, 1209, 1214, Replaces John Deere OEM number JD8275, (Item #: 116999) $11.98

Main Bearings - .010 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .010 over set of bearings replaces John Deere part numbers AT21132, AT21110 (Item #: 106796) $36.00

Main Bearings - .010 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .010 oversize bearing set replaces John Deere part numbers AT21110, AT21132 (Item #: 106804) $70.00

Main Bearings - .020 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .020 over set of bearings replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106797) $31.00

Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106805) $59.98

Main Bearings - .030 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .030 over set of bearings replaces John Deere part numbers AT21136, AT21114 (Item #: 106798) $70.00

Main Bearings - .030 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this ia .030 oversize bearing set replaces John Deere part numbers AT21136, RE27368 (Item #: 106806) $69.00

Main Bearings - Standard - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This Standard set of bearings replaces John Deere part numbers AT21139, AT21140 (Item #: 106795) $52.00

Main Bearings - Standard - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this bearing set replaces John Deere part numbers AT21139, AT21140 (Item #: 106803) $82.00

Rod Bearing 010 - Connecting rod bearing, .010 undersize, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 106752, Ref: TP-AT21117) $19.10

Rod Bearing, .010, Diesel - (JD) Rod Bearing 010 (Single Pair) - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. Single rod bearing .010 . For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106756, Ref: AT21124) $9.00

No
Picture
Rod Bearing, .010, Gas - SINGLE rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 2520 SN# 157354>, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODEL, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G (Item #: 106752, Ref: AT21117) $19.10

Rod Bearing, .020, Diesel - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. Single rod bearing .020". For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106757, Ref: AT21126) $7.70

Rod Bearing, .020, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106753, Ref: AT21119) $19.60

Rod Bearing, .030, Diesel - Single rod bearing .030". Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106758, Ref: AT21128) $6.60

Rod Bearing, .030, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106754, Ref: AT10519) $61.00

Rod Bearing, STD, Diesel - Single rod bearing. Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106755, Ref: AT21138) $7.50

Rod Bearing, STD, Gas - SINGLE (STD size) rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 GAS with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G, JD544 EARLY, JD544 LATE (Item #: 106751, Ref: AT10123) $17.00

Thrust Washer - For John Deere tractor models 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2440 (s/n 30999-earlier), 2440 (s/n 341000-later), 2510, 2520, 2550, 2555, 2630, 2640 (s/n 341000-later), 2640 (s/n 340999-earlier), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 3030, 3040 (s/n 430000-later), 3055, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999-earlier), 5020 (s/n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300B, 415B, 515B, Replaces John Deere OEM number R72507, (Item #: 113870) $31.00

No
Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 540D, 548D, 570, 570A, 610B, 640, 640 (s/n 314954 - later), 648D, 710B, Replaces John Deere OEM number R100234, R70251, R33166, R49295, R57915, R69587, (Item #: 115233) $11.90

Engine Gaskets

Conversion Gasket Set - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Replaces John Deere OEM number AR70998, Engine: 135, 164, 180, 202, 219 Gas, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106957) $129.00

Drain Plug Gasket - For John Deere tractor models 1020, 1520, 2010, 2020, 2030, 2040, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2640, 2750, 2755, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5200, 5210, 5300, 5310, 5310N, 5400, 5410, 5500, 5510, 5510N, 6030, 6100, 6120L, 6200, 6220L, 6300, 6320, 6320L, 6400, 6420, 6420L, 6520L, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7610, 7710, 7720, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 500, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644, 644C, 644D, 644E, 644G, 646, 646C, 648E, 648G, 690B, 690C, 693B, 700A, 740, 740A, 740E, 740G, 743, 743A, 744E, 748E, 748G, 760, 760A, 762A, 762B, 770A, 770B, 772A, 772B, 790, 792, 844, 850, 855, 860B, 862, 890, 892ELC, Replaces John Deere OEM number A4827R, (Item #: 109412) $2.50

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Item #: 176661, Ref: R97351) $14.10

Front Crank Seal, Diesel - Front seal. Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106849, Ref: AR67942) $6.80

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300X. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608) $6.80

Full Gasket Set - For John Deere tractor models 2020, 2510, Replaces John Deere OEM number RE501570, Engines: 202 Diesel, Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included), (Item #: 106932) $118.00

Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 2020, 2510 with 202 Diesel Engine (Item #: 131615, Ref: R-RE38558) $157.15

No
Picture
Head Gasket Set - For 2020, 2510 with 180 Gas Engine (Item #: 106881, Ref: HS3800) $78.00

No
Picture
Head Gasket Set - For 2020, 2510 with 202 Diesel Engine (Item #: 106882, Ref: R-RE38847) $63.00

Main Crankshaft Seal Front - For tractor models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Item #: 121742, Ref: AT344T) $12.70

No
Picture
Oil Pan Gasket - For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Item #: 106909, Ref: R97342) $11.60

Rear Crank Seal - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106854, Ref: AR92893) $27.10

No
Picture
Rear Main Seal - For 2020, 2510 with 202 Diesel Engine (Item #: 106854, Ref: R-RE24959) $27.10

No
Picture
Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Price shown is for each, sold only in multiples of 2 items. (Item #: 110545, Ref: TP-AR26480) $9.30

No
Picture
Upper Gasket - Valve grind set. For 2510 diesel, 4 cylinder 202 CID. Use with block numbers: T23406, T24961, T26933 only. TISCO supplies 3.86 standard bore 3 ring piston. For 2020, 2510 (Item #: 106882, Ref: HS3800W) $63.00

Engine Rebuild Kits

No
Picture
Basic Engine Kit - For 2020 and 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins and retainers, complete gasket set and crankshaft seals. Engine bearings must be ordered separately. (Item #: 130670, Ref: BEKD4444-LCB) $1009.01

No
Picture
Basic Engine Kit - For 2510 Diesel with block numbers T23406, T24961 and T26933 Only. 4 Cylinder, 202 CID. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Item #: 130672, Ref: BEKD4451-LCB) $740.00

No
Picture
Basic Engine Kit - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86 inch Std bore. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Item #: 130673, Ref: BEKD4452-LCB) $555.00

No
Picture
Basic In-Frame Engine Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189536, Ref: BIFD4444) $760.00

No
Picture
Basic In-Frame Engine Kit - For 2510 Gas with block # T32349 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189626, Ref: BIFD4445) $1779.01

Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T23406, T24961 and T26933 only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189543, Ref: BIFD4451) $535.00

No
Picture
Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189544, Ref: BIFD4452) $527.00

Basic Overhaul Kit - Basic engine kit, less bearings. For 2510 gas, 4 cylinder 180 CID. Use with block number T32349 only. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be orde For 2020, 2510 (Item #: 130671, Ref: BEKD4445-LCB) $1889.01

No
Picture
Engine Major Overhaul Kit - For 2020, 2510, 400, 440, 450, 480 all with SN<158257, 4.202 Diesel, 300 Series, O-Rings on liner, block # T23405 or T24961, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set, Camshaft Conn Rod Bushing and Bolts, and Camshaft Bushing. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030, Camshaft Bushing out. Diameter .020 O/S or inner dia. .020 O/S. Rear Seal not used with flywheel housing marked T20300, T22991. (Item #: 130672, Ref: OK4481) $740.00

No
Picture
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine 2020 Up to engine serial number 156883, 2510 Up to engine serial number 158257, 2510 Blocks with block numbers T23406, T24961 and T26933. 'O' Ring grooves ON LINER. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The early production of this engine has grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Item #: EKMC58) $1659.99

Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine serial number 156884 and up, with block numbers T32342, T53250 and T55034 Only. 4 Cylinder, 202 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3/16 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Item #: 183995, Ref: EKMC59) $2069.01

Engine Parts

No
Picture
Balancer Shaft - Left - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Item #: 114550, Ref: AR61352) $110.00

Balancer Shaft, LH - Balancer Shaft, LH This shaft is not the style that has the weight bolted on. MARKED AS R54054 . For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114550, Ref: RE26283) $110.00

Balancer Shaft, RH - Balancer Shaft, RH This shaft is not the style that has the weight bolted on. MARKED AS R54054. For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114551, Ref: RE26282) $118.00

Balancer Shaft - Right - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Item #: 114551, Ref: AR61351) $118.00

Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Item #: 152042, Ref: R82820) $206.00

Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Item #: 109500, Ref: R74194) $2.70

Crankshaft - This is a short snout, 1.42 inches. For 2510, 2020, 2030, 2520, 2440, 2250, 2510, 210C Backhoe, 6000 Hi Cycle, 219, 4239 Power Units. Crankshaft -FOR 4 CYLINDER Diesel engines, Less Bearings. Replaces AT18030, AT72949, RE33197, RE48748, RE57664. Casting numbers T23480, T23517, T28743, R81959, R94644. (Item #: 102103, Ref: S-AT18030) $610.00

No
Picture
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640. (Item #: 131577, Ref: VOKD202) $301.00

Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (Item #: 103943, Ref: R114282) $33.00

Tappet - For tractor models 2510, 5210, 5310, 5410, 5510, 820, 920, 1020, 1120, 1520, 2020, 2520, 3120, 5220, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 4030, 2040, 2140, 2240, 2440, 3040, 3140, 3050. (Item #: 123888, Ref: T20073) $7.90

No
Picture
Valve, Exhaust - Valve, exhaust, standard. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277549 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030 (Item #: 128630, Ref: TP-R79624) $10.70

No
Picture
Valve, Exhaust - Standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 169306, Ref: TP-T25467) $35.00

Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623) $9.00

No
Picture
Valve, Intake - For tractor models 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2840, 2940, 2950, 2955, 4030. (Item #: 128629, Ref: R79623) $9.00

No
Picture
Valve, Intake - Valve, intake, standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 169003, Ref: TP-T25466) $16.60

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - Bushing, for 1-3/16 outside diameter piston pin. 6 used per engine. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2510, 2520, 4030 (Item #: 156030, Ref: T23471) $4.98

No
Picture
Piston Pin Bushing - Piston pin bushing, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. For 2010 with 145 CID Gas Engine 3.86 standard bore 3 ring piston. For 1020, 2010, 2020, 2510, 2520 (Item #: 108007, Ref: TP-T526T) $47.00

No
Picture
Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Item #: 156030, Ref: T23471) $4.98

No
Picture
Sleeve and Piston Kit - For one hole. Fits Models: (1020 gas with SN# up to 162078), (2020 SN# up to 159926), (2510 gas with block # T23405, T24960, T26932), (300, 350, 400, 450, 480 early models). Reference SK404 (Item #: 189185, Ref: SK404) $198.00

No
Picture
Sleeve and Piston Kit - Complete kit for one cylinder. 3.86" bore, 1.185" pins. O-rings in block. (3) required For tractor models 1020, 1030, 300, 300A, 300B, 301A, 350A, 350B, 380, 820, 830 all SN# 154766 and up with 3.152D engine. (4) required For tractor models 2020, 2510, 400, 440, 480 all SN# 158257 and up with 4.202 engine. (6) required For tractor models 3420, 544 SN# 158976 and up with 6.303 engine. Kit comes with piston, pins, sleeve, rings. (Item #: 166127, Ref: AR71591) $125.00

No
Picture
Sleeve Assembly (4 Required) - 3.858 Bore with O-Rings in Block For 2020, 2510 with 202 Diesel Engine (From S#158258) (Item #: 166127, Ref: AR71591) $125.00

Engine Rings

No
Picture
Engine Rings - For 2510 Diesel with block numbers T23406, T24961 and T26933 Only. 4 Cylinder, 202 CID, 3.86â Std bore. One set used per engine. Ring set for 3 ring piston. (Item #: 120921, Ref: PRS451) $26.20

Exhaust System

No
Picture
Manifold Gasket Set - For gas tractor models (180, 202 power units from SN# 51230), 400 Ind., 401, 401B, 401C, 480 Forklift, 480A Forklift, 480B, 2020, 2510, 2520 all with 4 cylinder gas engines. (Item #: 107950, Ref: R4778G) $46.00

Manifold Gasket Set - This Gasket Set is used with T20249 Manifold. It replaces part numbers R90658, T20006 (Item #: 101603, Ref: R0911G) $13.00

Manifold, Vertical - Order gasket set separately, part R4778G. For tractor models 2020, 2030, 2510, 2520, 400. All with 4 cylinder gas engines. (Item #: 107943, Ref: T20247) $323.00

Manifold, Vertical Exhaust - This Diesel Manifold is used on 1830 (AG), 2011, 2020, 2030, 2035 (SPAIN), 2120, 2130, 2135, 2440, 2510, 2520, 2630, 2640, 401A, 401B, 401C, 480A, Forklift: 480B, Industrial: 310, 400, 401, 410, 480; models 4 cylinder 202, 219 or 276 cubic inch diesel engines with vertical exhaust. Does Not come with gasket. Gasket set available Part Number R0911G. (Item #: 101602, Ref: T20249) $111.00

Muffler - Vertical Exhaust Inlet I.D. - 2 1/2 - Flared Outlet O.D. - 2 1/2 Overall Length - 34 For 2510. OEM# Use R1802 Rain Cap (Item #: 101186, Ref: R1673) $65.00

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794) $9.70

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On John Deere, it is used on the following Carburetors TSX85, TSX89, TSX245, TSX356, TSX475, TSX485, TSX491, TSX530, TSX615, TSX688, TSX756, TSX759, TSX777, TSX788, TSX802, TSX805, TSX806, TSX808, TSX809, TSX810, TSX812, TSX823, TSX860, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX907, TSX908, TSX908SL, TSX923SL, TSX941SL, TSX944, TSX945SL, TSX952SL, TSX953SL, TSXU838, TSXU1007, USX20, USX21, USX30, USX31, USX35, USX36, USX48SL, USX49SL, USX211. These carburetors are possible on John Deere Models: M, 600, MI, MT, 320, L, 500, LA, MC, 40, 330, 420, 430, 24, 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, 500A, 500B, 440A, LI, 440B, 99 Replaces: E10058, R10188 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: 1520, 2030, 2510, 2520, 4030 tractors. Zenith Carburetor replaces numbers TSX394, TSX777, TSX944, TSX944SL, TSX945SL, TSX969SL, TSXU839, TSXU995. Does not include electric shut-off. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA. 1 year warranty. (Item #: 100750, Ref: 14997) $630.00

Carburetor - New carburetor with reversible linkage. For M, MC, MT (VD Engine serial number 1000up), 40, 77 Crawler, 300 (135G), 320, 330, 350 Crawler, 1020, 2010, 2020, 2500, 2510, Combines 45 (HA145, HA165D, 145GH, 180G4H Engine), 55 (HA217 gas), 95 (303G5H, 303G6H), 8x6 and 99 Cotton Pickers, NA217, 135 G Sprayer. Replaces Marvel -Schebler numbers TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX959. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 100752, Ref: 14996) $470.00

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $365.92

Carburetor Choke Arm - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Replaces OEM number T25158, Marvel Schebler carburetors TSX904, TSX905, TSX944, TSX945, (Item #: 113489) $186.98

Carburetor Choke Shaft - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT22990, T25149, AT22989, For Marvel Schebler Carburetor number TSX904, TSX905, TSX944, TSX945, (Item #: 110034) $92.00

Carburetor Float - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 440, 1020, 1520, 2010, 2020, 2030, 2510, 2520. All with Marvel-Schebler Carburetors: TSX245, TSX475, TSX530, TSX562, TSX641, TSX678, TSX688, TSX756, TSX808, TSX810, TSX899, TSX904, TSX904SL, TSX905, TSX905-1, TSX944SL, TSX945SL, TSXU963. Replaces OEM 30-739. (Item #: 105095, Ref: R2383) $17.80

Carburetor Kit, Basic - Kit for Marvel TSXU963, TSX904SL, TSX904, TSX944, TSX944SL, TSX810, TSX808, TSX899, TSXU9631, TSX905, TSX905-1, TSX945SL, TSX475, TSX530, TSX245, TSX562, TSX641, TSX679, TSX688, TSX689, TSX678 carbs used on 1020, 1520, 2010, 2020, 2030, 2510, 2520, 320, 40, 420, 430, M. (Item #: 100734, Ref: MS102) $18.00

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX904, TSX905, TSX944, TSX945. For the following tractor models: 1020, 1520, 2020, 2030, 2510, 2520. Add $150.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 203295, Ref: 1527-CARB) $255.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX905, TSX945. For the following tractor models: 2020 2510, 2520. The Center-to-Center measurement on the mounting bolts is 2 5/8 inches. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203295, Ref: 1530-CARB) $255.01

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.30

Fuel Injection Return - "T" Boot fuel injection return. Fits models: 1020, 1120, 2020, 2120, 2510, 3120, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 5200, 5400, 5440, 5460, 6076 Eng. SN# <576895, 6600, 6602, 6619 Eng. SN# <027969, 6620, 690B, 693B, 7440, 7700, 7720, 820, 8430, 8630, 920, 9920, 300, 350, 400, 440, 440A, 440B, 450, 480, 544, 544A, 570, 570A, 740, 743, 762. (Item #: 179682, Ref: T23425) $5.70

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Item #: 140647, Ref: TP-RE42211A) $27.50

Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3/8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Item #: 112524, Ref: TP-RE42211B) $25.90

Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Item #: 176360, Ref: AT27622) $14.50

Fuel Sending Unit - For John Deere tractor model 2510, Replaces John Deere OEM number AR38269, (Item #: 119713) $78.00

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $15.60

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Item #: 172673, Ref: AT20911) $10.00

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. For Gas tractors : 1520, 2030, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030. (Item #: 180105, Ref: RE42211RK) $27.20

Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R) $21.10

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R) $28.30

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $15.30

Throttle Knob - Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Item #: 125658, Ref: R26670) $5.90

Gauges

Fuel Gauge, 12V - This Fuel Gauge is 12 Volt Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. Housing depth is 1.205 inches. (Item #: 155405, Ref: R34262) $41.00

Fuel Gauge, 12V - 12 Volt Positive ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to Serial Number 122999), 4010, (4020 up to Serial Number 200999), 5010, (5020 up to Serial Number 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Positive Ground or it will not work and damage the gauge. (Item #: 160956, Ref: R34262P) $41.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Item #: 117361, Ref: RE206853) $114.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121304, Ref: RE206854) $126.00

Tachometer With White Needle - This tachometer with white needle has provision for fiber optic light and illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853. (Item #: 121302, Ref: AR50404) $116.00

Tachometer With White Needle - This tachometer with white needle has a provision for fiber optic light and illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121626, Ref: AR50405) $156.00

No
Picture
Transmission Oil Pressure Gauge - JD Power Shift Transmission Pressure Gauge for JD 600 Industrial, 500, 2510, 3020 up to SN # 122999, 4020 up to SN # 200999, 500A up to SN # 123113 Replaces: R34259. Measures 2.030 inches OD and 1/8 inch NPT male thread. (Item #: 160955, Ref: R34259) $40.00

Transmission Oil Temperature Gauge - For tractor models 2510, (3020 up to SN# 122999), (4020 up to SN# 200999). (Item #: 108065, Ref: R34258) $46.00

Water Temperature Gauge - This water temperature gauge has a 29inch lead. Max temperature is 250 degrees and minimum is 100 degrees. It has no provision for fiber optic light. It has a 2.045 inch housing diameter and a 2.324 inch bezel diameter. Fits John Deere - [ 2510, 5010 (For Gas and Diesel through 1968) ], 3020 (For gas and Diesel through 1968 (up to SN: 122999)), 4020 (For gas and Diesel through 1968 (up to SN: 200999)), 5020 (For Gas and Diesel through 1968 (up to SN: 024999)); Replaces: AR36383, R34263 (Item #: 108061, Ref: R34263) $44.00

Hitch / Drawbar

Drawbar - For John Deere tractor models 2510 (Row-Crop), 2520 (Row-Crop), 3010, Replaces John Deere OEM number R27692, 45.00" long, 2.00" Wide, 1.25" Thick, 1.875" Offset, Four .765" diameter holes @ 1.440", 2.440", 7.440" and 12.690" from front, (Item #: 112181) $195.00

Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Item #: 128172, Ref: AR69988) $26.80

Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 and 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Item #: 121854, Ref: R81576) $140.00

Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 and 2.310 and 4.360 and 7.050 and 9.050 and 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. (Item #: 110260, Ref: RE20662) $162.00

Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Item #: 121855, Ref: AR27599) $44.00

Drawbar Pin, Front - Used on John Deere 2510 Row Crop, 2520 Row Crop and 3010 tractors, the diameter of this pin is 0.750 inches. Replaces John Deere part number AR26415 (Item #: 128126, Ref: AR26415) $50.00

Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728) $19.70

Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503) $6.40

Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189) $37.00

Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $7.10

Front Pull Arm, LH - Left Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110985, Ref: AR32548) $264.00

Front Pull Arm Pin - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, (Item #: 114090) $11.50

Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110986, Ref: AR32547) $329.00

Leveling Link Adjusting Shaft - Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Item #: 111630) $55.00

Lift Arm Adjusting Handle - Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Item #: 110130) $25.70

Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Item #: 110577, Ref: R26611) $100.00

Lift Link Seal - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26616, Inside Diameter; 1", Outside Diameter: 1.503", (Item #: 110138) $7.70

No
Picture
Load Control Shaft - Shaft is 20.937 inches long and 1 inch diameter. For tractor models 500, 2510, 2520, 3010, 3020, 4030. (Item #: 128555, Ref: R33883) $105.00

No
Picture
Load Control Shaft Bushing - Bushing with O-Ring. For tractor models 500, 2510, 2520, 3010, 3020, 4030. Also available in oversizes .003, .006 and .030. State size required in comments section of order form if oversize is required. 2 required per tractor. (Item #: 113995, Ref: R27018_) $16.00

Load Control Shaft Seal - 2 Seals required per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Item #: 115050, Ref: AR27371) $7.00

Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558) $8.60

Lower Lift Link Housing Yoke - For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26615, (Item #: 110512) $160.00

Pull Arm Latch - For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Item #: 108518, Ref: AR90082) $58.00

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570) $160.00

Rockshaft Control Cable - For tractor models 2510, 3010 and early 3020 before SN# 122999. (Item #: 114691, Ref: AR26810) $93.00

Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Item #: 108936, Ref: R3139) $66.00

Sway Block, LH - This Left Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. Replace R39513 (Item #: 108936, Ref: R39513) $66.00

Sway Block, RH - This Right Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. It Replaces R39512 (Item #: 108937, Ref: R39512) $56.00

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $13.00

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.70

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.70

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.90

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

No
Picture
Top Link - Top link with knuckle with 7/8 hole and Category II quick release hook. 12 center body with clip. 1-1/4 threaded ends. Adjusts approximately 25 to 33.5. For 2510, 2520, 4030 (Item #: 102072, Ref: TP-PM03481) $150.00

Top Link Ball, Category I - This is a Category I Ball for a 2 inch socket and 3/4 inch pin. It is used with AR34208 top link. Replaces F2680R (Item #: 121860, Ref: F2680R) $7.10

Top Link Ball, Category II - This is a Category II Ball for a 2 inch socket and 1 inch pin. It is used with AR34208 top link. Replaces F2681R (Item #: 111379, Ref: F2681R) $4.98

Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762) $5.90

Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557) $7.30

Hydraulic System

Break-Away Coupler Overhaul Kit - For John Deere tractor models 1020, 1520, 1530, 1640, 2010, 2020, 2030, 2040, 2040S, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3040, 3140, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82570, (Item #: 115326) $17.50

Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Item #: 165242, Ref: AR94660) $1129.01

Hydraulic Pump - Hydraulic Pump has 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 5/8 Right Inlet, 1 1/16 inch Discharge. Verify measuerments before ordering. It is used on 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 300 Indust/Const, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 500 Indust/Const, 5010, 600 Indust/Const, 9950 Cotton Picker, 9960 Cotton Picker, 9965 Cotton Picker, 9970 Cotton Picker. It replaces AR39168, AR90459, AR97872, R39695 (Item #: 114592, Ref: AR97872) $1019.01

Hydraulic Pump Drive Coupler Half - Two required for 1 complete coupler. For tractor models JD300, JD301, JD400, 301A, 302, 3030, 3120, 3130, 401B, JD380, 401C, 480C, (830, 930 SN# 258366 and up), (1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 1030 all with small pump). (Item #: 113925, Ref: R38348) $12.00

Hydraulic Pump Inlet Valve - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 4240, 4250, 4255, 4320, 4430, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number AR53301, 2.4 cu. in. Serialized and Non-Serialized, 3 cu. in. Serialized and Non-Serialized, 4 cu. in. Serialized and Non-Serialized, (Item #: 113886) $31.00

Hydraulic Pump Packing - For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 7445 (s/n 275483, 4.219 engine), Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s/n 123113-earlier), 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s/n 123113-earlier), 844, 860, 860A, 862, Compatible with John Deere Engine (s) 6359T, 6466D, 6466T, Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483, 4.219 engine), Replaces John Deere OEM number R26149, (Item #: 113996) $2.30

Hydraulic Pump Seal and O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Item #: 114400, Ref: RE29107) $99.33

Hydraulic Pump Seal and O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Item #: 113864, Ref: RE29103) $61.00

Hydraulic Pump Stroke Control Valve - For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Item #: 113888, Ref: RE10712) $46.00

Lights

No
Picture
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Item #: 118520, Ref: S.51140) $5.10

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.00

Dash Light - 12 Volt - For tractor models 50 up to SN# 5016122, 60 to SN# 6017060, 70 Highcrop to SN# 706327, 520 to SN# 5208099, 1010, 2010, 2510, 3010, 3020 to SN# 122999, 4010, 4020 to SN# 200999, 5010, 5020, 6030, 8020. (Item #: 105319, Ref: AD2835R-12V) $17.80

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1) $5.40

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $26.50

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $9.30

Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Item #: 123453, Ref: T12443) $45.00

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Item #: 123454, Ref: R27460) $13.60

Light Switch - 4 position, 9 terminal, .50 inch thread dia. For tractor models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), 4000, (4020 SN# 91000 - 250000), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Item #: 113307, Ref: AR41288) $26.90

Light Switch Knob - For tractor models 1010, 2010, 2510, (2520 up to SN# 22000), (4000, 4020 up to SN# 250000), 4010, (4520 up to SN# 142449), 5010, (5020, 6030 without cab). Replaces R27963. (Item #: 126564, Ref: AT65316) $13.50

Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Item #: 150646, Ref: AA925R) $21.80

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.20

Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Item #: 105346, Ref: AR77326) $67.00

Miscellaneous

Bearing Cone - For John Deere tractor models 70, 70 (Diesel), 1640 (sn:430000-later), 1830, 2030, 2040 (sn:430000-later), 2040S (sn:430000-later), 2130, 2140 (sn:430000-later), 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (sn:765516-earlier), 3010, 3020, 3030, 3040 (sn:430000-later), 3055, 3130, 3140 (sn:430000-later), 3150, 3155, 3255, 4000 (sn:201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300B, 415B, 515B, Replaces John Deere OEM number JD8192, Replaces Timken manufacturer number 3872, (Item #: 113891) $37.00

Bearing Race - For John Deere tractor models 1640 (Europe, s/n 429999-earlier), 1640 (s/n 430000-later), 1830, 1840 (Europe, s/n 429999-earlier), 2040 (Europe, s/n 429999-earlier), 2040 (s/n 430000-later), 2040S (Europe, s/n 429999-earlier), 2040S (s/n 430000-later), 2130, 2130 (Hydrostatic FWD), 2140 (Europe, s/n 429999-earlier), 2140 (s/n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3030 (Hydrostatic FWD), 3040 (Europe, s/n 429999-earlier), 3040 (s/n 430000-later), 3130, 3130 (Hydrostatic FWD), 3140 (Europe, s/n 429999-earlier), 3140 (s/n 430000-later), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R45874, (Item #: 113878) $35.00

Brake Valve Overhaul Kit - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 ('74 - '81), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 540, 540A, 570, 570A, 600, 670, 670A, 672A, 700A, 760, 770A, 772A, Replaces John Deere OEM number AR30687, AR31946, (Item #: 115353) $37.00

Guide - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 5010, 5020, Compatible with John Deere Construction and industrial models 300, 400, 440, 440A, 440B, 500, 500 (Series A, s/n 123113-earlier), 500A (s/n 123114-152141), 540, 540A, 544, 544A, 570, 570A, 600, 644A, 700, 700A, 760, Replaces John Deere OEM number R27157, Guide for Four Piston Hydraulic Pump, (Item #: 118794) $18.98

No
Picture
Hammer Strap - Offset For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630 (Item #: 180088, Ref: R3102) $146.00

No
Picture
Hammer Strap - Straight. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630. (Item #: 109873, Ref: R3103) $85.00

No
Picture
Hydraulic Pump Shaft 2.4 - For John Deere tractor models 1640 (Europe, s/n 429999-earlier), 1640 (s/n 430000-later), 1830, 1840 (Europe, s/n 429999-earlier), 2030, 2040 (Europe, s/n 429999-earlier), 2040 (s/n 430000-later), 2040S (Europe, s/n 429999-earlier), 2040S (s/n 430000-later), 2130, 2140 (Europe, s/n 429999-earlier), 2140 (s/n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040 (Europe, s/n 429999-earlier), 3040 (s/n 430000-later), 3130, 3140 (Europe, s/n 429999-earlier), 3140 (s/n 430000-later), 4010, 4030, 5010, Replaces John Deere OEM number R39843, 14 Spline, Used in 39CC (2.4 Cubic Inch) pump, Additional Handling and Oversize Fees Apply To This Item, (Item #: 117724) $83.00

No
Picture
Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 109374, Ref: R3058) $215.00

No
Picture
Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 108910, Ref: R3059) $402.00

Roller Bearing - For John Deere tractor models 1640, 1830, 2030, 2040, 2040S, 2130, 2140, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5103, 5203, 5303, 5403, 5415, 5415H, 5425, 5615, 5625, 5715, 5715HC, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number R27145, (Item #: 113887) $0.60

SCV Remote Valve End Cover - For John Deere tractor models 940, 1010, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2510, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4010, 4020, 5010, 5020, 7020, 7520, Compatible with John Deere Combine (s) 2240, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number R49186, (Item #: 112299) $28.50

Oil System

Oil Filter, Spin-On Type - This oil filter measures 3 11/16 inches outside diameter, 5 13/16 in length and is 13/16 16 thread. For Cotton Pickers/ Strippers: 482, 484, 9900, 9910. For 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2240, 2250, 2255, 2270, 2280, 2350, 2355, 2420, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3300, 4030, 4400, 4420, 482, 484, 6600, 6602, 7700, 9900, 9910. Replaces BT259, T19044T, TPT19044, T19044, AR58956, 7000014640, 70000-14640, 6511730, A18A303, A-18A303, 720801, WIX 51243. (Item #: 111133, Ref: TP-T19044) $7.70

Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Item #: 121439, Ref: AR27977) $10.66

Oil Pump - With Tube for 2510, 1020, 1520, 2020, 2520, 1530, 2030, 4030, 2440, 2840, 2940, 820 German, 830, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 2755. Engine Oil Pump Kit contains: Pump Boby, Driven Gear and Shaft, Driven Gear, and Rear Cover. Replaces OEM# RE35685. (Item #: 114022, Ref: S.60037) $72.00

Oil Pump - For 1020, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2270, 2280, 2320, 2350, 2355, 2420, 2440, 2510, 2520, 2730, 2750, 2850, 2940, 300, 300A, 300B, 301, 301A, 302, 302A, 310. Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Item #: 114022, Ref: RE35685) $72.00

Oil Pump Drive Gear - For 1020, 1520, 1530, 2020, 2030, 2040, 2144, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear. (Item #: 121172, Ref: T20298) $192.87

Oil Pump Drive Gear - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear has 33 Tooth, 3.625 O.D., .550" I.D. (Item #: 121172, Ref: T20298) $192.87

PTO / Driveline

No
Picture
Bearing Race - Replaces JD10283. Inside diameter is 1.181", outside diameter 1.602", width is .748". For tractor models 3120, 300, 301, 400, 401, 500, 600, 1020, 1120, 1520, 2020, 2030, 2120, 2140, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450 and 4455 (Item #: 111372, Ref: JD7557) $12.00

PTO Guide - Used on John Deere 301, 500, 600, 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455. Replaces John Deere OEM numbers R38220, R70960, R72046, R45126 (Item #: 121740) $77.00

PTO Shaft - The new 1000 RPM PTO shaft is 10.875" long with 21 Splines. Fits John Deere 2510, (3020 Up to Serial Number 122998), (4020 Up to Serial Number 200998). Replaces R33342 (Item #: 109361, Ref: R33342) $161.00

No
Picture
PTO Shaft - 540 RPM - 6 Splines 10.687 Long For 2510 (To S#10490), 3020 (To S#122999), 4020 (To S#200999) (Item #: 111774, Ref: R3086) $124.00

PTO Shaft - 540 RPM - 6 Splines 10.687 Long For tractor models 2510 (From S#10491), 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4255, 4320, 4430, 4440, 4450. Replaces AR41752, R41756 (Item #: 108507, Ref: AR41752) $110.00

PTO Shaft - 1000 RPM - 21 Splines 10.875 Long For tractor models 2510, 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Replaces OEM R38224 (Item #: 108935, Ref: R3088) $96.00

PTO Shield - For 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4455. PTO Shield. (Item #: 104094, Ref: R33348) $39.00

Shaft, PTO (540 RPM) - This is a 540 RPM shaft to replace 1000 RPM standard shaft. Fits tractor models 500A (IND), 500B (IND), 500C (IND), 600 (SN 201000>), 2510, 2520, 3020 (SN 123000>), 4000, 4020 (SN 201000>), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Dimensions: 11.840" long, 6-spline. (Item #: 121487, Ref: R38224SP) $213.00

Shaft, PTO (540 RPM) - Does not include JD7557 Bearing Race. Fits 500, 500A, 600, 2510, 3020 (SN <-122999), 4020 (SN <-200999). Dimensions: 10.687" long, 6-spline. (Item #: 111774, Ref: AR41753) $124.00

Seats

Seat Back - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. Replaces AR59680-6, AR59680, R34268 (Item #: 109267, Ref: R0183) $222.00

Seat Bottom - This is only the Seat Bottom in Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 109266, Ref: R0182) $171.44

Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket and (1) R31513 LH seat bracket. (Item #: 108180, Ref: SBK400) $31.00

Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. Used SBK400 Bracket Set, not included. The bottom cushion in this set is 3 1/2 inches thick. Replaces R34618, R34619, R34620, TY26545 (Item #: 109348, Ref: JD5678) $290.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Upper Back - This is only the Upper Back Piece in Yellow Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 109265, Ref: R0184) $55.00

Sheet Metal / Body Parts

Battery Box - Left - This left side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Replaces AR20210, AR26617, AR34819, AR40208, AR40674. Battery box comes primed. (Item #: 104080, Ref: JTBL-1WB) $56.00

Battery Box, LH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104080, Ref: AR40208) $56.00

Battery Box, RH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard SN# 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: AR40207) $62.00

Battery Box - Right - This right side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Battery box comes primed. Replaces Replaces: AR10209, AR26618, AR34185, AR40207, AR40673. (Item #: 104079, Ref: JTBR-2WB) $62.00

No
Picture
Battery Box, Right Hand Side - Right Hand with Stamped Steel Tray For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 Row Crop Models without Cab. OEM# AR34185, AR40207, AR40209, AR40673. Needs left hand side to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: R0161) $62.00

Extend-A-Step - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, To be used with left hand step kit use Item #: 113386, (Item #: 110137) $86.00

Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103964, Ref: R70588) $108.00

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103958, Ref: RE13879) $240.00

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab and sound guard body. Tractors: 530, 630 gp (SN# 6300000 and up), 730G&D GP (SN# 7300000 and up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103957, Ref: RE13878) $240.00

Fender - Flat Top, RH Side, With Hand Hole - For 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces OEM RE13878. Rubber Hand Hole Grommets available as part number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127011, Ref: AR48872) $328.00

Fender U-Bolt - This Fender U-Bolt is used on John Deere (2010 Rowcrop Utility; SN: 42001 and up), 2010 Rowcrop, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. It Replaces original part number R26992 (Item #: 103965, Ref: R26992) $13.55

No
Picture
Front Grill Screen - For 2510, 2520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104084, Ref: R2454) $130.00

Front Nose Cone Screen - For tractor models 2510, 2520. Powder Coat JD Green. (Item #: 104084, Ref: AR38233) $130.00

No
Picture
Handrail - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Easy to install with no holes to drill and hardware is included, Durable green powder coat finish, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step kit use Item #: 114447, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114445) $77.00

No
Picture
Side Moulding - With Decal - Right Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1525) $140.00

No
Picture
Side Moulding - With Decal - Left Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1526) $140.00

No
Picture
Side Screen - 17 x 17 For 2510, 2520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104091, Ref: R2002) $100.00

Step Adapter Bracket - Left Hand - For John Deere tractor models 1010, 1020, 2010, 2020, 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Fits left hand side, For use on equipment less cab, Easy to install with no holes to drill and hardware is included, For Step Unit - Left Hand use Item #: 113386, (Item #: 108978) $77.00

Step Adapter Bracket - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Fits right hand side, For use on equipment less cab., Easy to install with no holes to drill and hardware is included, Comes primered (color may vary). Prior to painting check fitment, For a Right Step Unit use Item #: 114447, (Item #: 114446) $77.00

Step Pad - For tractor models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Item #: 109589, Ref: F3195R) $35.00

Step Unit - Left Hand - For John Deere tractor models 2420 (Open station row crop and will require adapter bracket), 2510 (Open station row crop and will require adapter bracket), 2520 (Open station row crop and will require adapter bracket), 2950, 3010 (Open station row crop and will require adapter bracket), 3020 (Open station row crop and will require adapter bracket), 3030, 3040, 3130, 3140, 3150, 3155, 4000 (Open station row crop and will require adapter bracket), 4010 (Open station row crop and will require adapter bracket), 4020 (Open station row crop and will require adapter bracket), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4260, 4320 (Open station row crop and will require adapter bracket), 4350, 4430, 4440, 4450, 4455, 4520 (Open station row crop and will require adapter bracket), 4555, 4560, 4620 (Open station row crop and will require adapter bracket), 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all other with Sound Guard cab), Fits left hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Handrail shown is sold separately, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 113386) $190.00

No
Picture
Step Unit - Right Hand - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all row crop with open station), Fits right hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114447) $230.00

Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103952, Ref: R27883) $41.00

Weight Bracket - For John Deere tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020 (s/n 122999-earlier), 3040, 3140, 3150, 3155, 3340, 3540, 3640, 4020 (s/n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 4960, 5020, 6030, 6100D, 6105D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603, 7200, 7200R, 7210, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7400, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8450, 8560, 8650, 8760, 8850, 8960, Replaces John Deere OEM number R117599, AR72132, Weight: 128 lbs, Width: 20", Bolt Hole Centers: 14" and 3", Holds 10 of item no. 119703, Holds 14 of item no. 119704, Holds 14 of item no. 119702, 3/4"x 2" Bolts Required, (Item #: 119693) $200.00

Weight - Suitcase, Front - For John Deere tractor models 1020, 1450, 1520, 1530, 1550, 1650, 1750, 1850, 1950, 2020, 2030, 2040, 2150, 2155, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4055, 4230, 4240, 4255, 4320, 4430, 4455, 4520, 4620, 4630, 5020, 5045, 5045D, 5045E, 5055, 5055D, 5055E, 5065M, 5070M, 5075, 5075E, 5075M, 5080M, 5083, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101, 5103, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5625, 6030, 6105M, 6105R, 6115M, 6115R, 6125, 6125M, 6125R, 6130, 6130R, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6210, 6210R, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7200, 7300, 7400, 7500, 7700, 7800, Compatible with John Deere Hay Cutting (s) 2360, Replaces John Deere OEM number R51680, Weight: 100 lbs, Made For Most 5000 Series Utility Tractors, Thickness: 2", (Item #: 119703) $133.00

Steering

Axle Center Tube - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Replaces original part number AR50865 $100 will be added for shipping due to size/weight of part. (Item #: 108906, Ref: R0009) $1439.01

No
Picture
Axle, Front Housing Clamp - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number AR30154, Replaces John Deere Casting number R27809, Front Axle Housing and Pivot Bracket Clamp, (Item #: 119444) $103.00

Complete Wide Axle Assembly - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 450 lbs. (Item #: 108907, Ref: AR44331) $3099.01

Complete Wide Axle Assembly, Heavy Duty - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly - HEAVY DUTY. Includes all framing, tie rod and spindles. This part ships via truck freight. Please call for pricing and ordering. (Item #: 110954, Ref: AR44331H) $3419.01

Front Axle Housing Lock Bolt - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, (Item #: 108966) $23.70

Front Axle Housing with Bushings - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Front Axle Housing with Bushings. Used on AR44331 and AR44331H wide front ends. (Item #: 108906, Ref: AR50865) $1439.01

Front Axle Mounting Plate Wedge - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number R49098, (Item #: 109528) $43.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $66.00

Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Item #: 123964, Ref: AR44333) $550.00

Knee Extension - Knee Extension. Used with Ar55180 spindle. Dimensions A-3.250 inch B-18.000 inch C-12.750 inch For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900 tractors (Item #: 109374, Ref: AR50962) $215.00

Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Item #: 110032, Ref: AR44333KN) $359.00

Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Item #: 108910, Ref: AR50963) $402.00

Pivot Bolster - Use R3064 Pin. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping due to weight. (Item #: 110737, Ref: R3063) $540.00

Pivot Pin - Used front and rear, 4.375" long, 1.500" dia. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Item #: 108967, Ref: R27817) $41.00

Pivot Plate - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Pivot plate with caps and bolts. (Item #: 110737, Ref: AR69836) $540.00

No
Picture
Spindle - Spindle, Right Hand or LH, for row crop tractors with adjustible front axles. This later production style spindle has a 5/8 diameter hole for steering arm bolt. Early production spindles with 3/4 diameter hole are no longer available. Check bolt/hole size befor For tractor models 2510, (2520 SN# 022001 and up), 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 102218, Ref: TP-AR55180) $160.00

No
Picture
Spindle - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020 (All with Schwartz Front Axle), Replaces John Deere OEM number 3997, Vertical Length 13-3/8, Shaft Diameter 1-5/8, Spindle Diameter 1-5/8, Seal diameter 2.375", 6 Spline Spindle, Inner Bearing diameter 1.688", Outer Bearing diameter 1.3115", Requires 1 inch fine threaded nut, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108820) $275.00

Spindle - Spindle, LH/RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001 and up. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 104778, Ref: AR50981) $205.98

Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 108046, Ref: A877R) $15.00

Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 110031, Ref: AR44333SP) $307.00

$John Deere 2510 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 15.125", B= 1.500", C= 1.687", D= 1.312". For tractor models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102218, Ref: AR55180) $160.00

Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Item #: 108047, Ref: A890R) $6.60

Steering Arm - For John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number 2381, (Item #: 111425) $118.00

Steering Arm, Center - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900. (Item #: 102703, Ref: R27808) $111.00

Steering Arm, LH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Item #: 102705, Ref: R47766) $51.00

Steering Arm, RH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Item #: 102704, Ref: R47765) $49.00

Steering Wheel - 16" diameter, 7/8" splined hub, smooth finish, like original. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 4320, 4520, 4620, 5010, 5020, 6030, 7030, 7520. Uses cap for 2-7/16 inch opening. (Item #: 101447, Ref: AR26625) $49.00

Steering Wheel Cap - For tractor models 1020, 2020, 2510, 2520 all with manual steering. (Item #: 101455, Ref: R5083) $60.00

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $67.00

Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101457, Ref: R26673) $61.00

Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101456, Ref: JDS338) $70.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.90

Tie Rod Assembly - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 Inch LENGTH ON INNER TIE ROD TUBE. Contains AR51584, AR27351, R28021, R28022, R28023, R28024 plus hardware. (Item #: 102252, Ref: AR44332) $90.00

Tie Rod Assembly - For tractor models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 Inch LENGTH ON INNER TIE ROD TUBE. (Item #: 104871, Ref: AR44334) $119.00

Tie Rod End - Tie rod end, outer, 7/8-18 threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Item #: 104865, Ref: TP-AR27351) $16.00

Tie Rod End - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Item #: 104866, Ref: TP-AR51584) $31.00

No
Picture
Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Item #: 104870, Ref: R3830) $73.98

Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R3042) $34.00

Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R28021) $34.00

Tie Rod Tube - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R28022, 11.500" Long, Small inner tube, (Item #: 104869) $23.60

Wheels

No
Picture
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: 2788) $17.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Item #: 169912, Ref: M88048) $11.20

No
Picture
Bearing Cone - Inner bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: TP-JD7222) $17.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Item #: 173107, Ref: JD8913) $13.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Item #: 173107, Ref: 25577) $13.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $25 shipping due to weight. (Item #: 103764, Ref: FW60156) $116.00

Front Wheel Bearing Kit - Wheel bearing kit. For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. Kit Contains: 25521 (Cup), 25577 (Cone), M88010 (Cup), M88048 (Cone), AR26480 (Seal), R26632 (Seal Retainer), . Repairs one wheel. (Item #: 102229, Ref: FW157S) $47.00

Hub Cap - Used on John Deere 2030, 2510, 2630, 4030, 4230, 4320, 4430, 7520, 7520, 2150, 2440, 2640, 2755, 2840, 4040, 4040, 4050, 4250, 4240, 4240, 4450, 4455, 4440 with one of the following hubs: R49839, R49841, P58400, R112915. This part is also used as an oil pump end cap for oil pump RE591837. This cap is not threaded. It taps into place. 2.688 inch outside diameter of base where it fits into the hub, 1.750 inches tall. (Item #: 179597, Ref: R50992) $15.10

No
Picture
Retainer - Retainer. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 180109, Ref: TP-B89R) $24.90

Spindle Dust Shield - For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2693R, 4020KR, Used with AR50962 and AR50963 knees, (Item #: 110385) $12.80

Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577 (Cone), 25521 (Cup), M88048 (Cone), M88010 (Cup), 23342 (Seal), R26632 (Seal Retainer). (Item #: 102229, Ref: WBKJD6) $47.00

Wheel Bolt - This wheel bolt fits the following John Deere tractor models using the R49839 and R47076 hubs: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, and 4240. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: AA4173R and AT11920. (Item #: 108605, Ref: WB916) $2.30

Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 or WBKJD7 (depending on spindle), WB916 Bolts and hub cab A1555R. (Item #: 102237, Ref: R48763) $56.00

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref: A1555R) $14.30

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $352.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $103.00

Decals and Emblems

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.80

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $42.00

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $23.90

Electrical System

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $113.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $12.80

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $58.00

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $53.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $23.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.70

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.60

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 2510 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $8.00

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $77.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $115.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $113.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $156.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $140.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $180.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $116.00

$John Deere 2510 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.80

$John Deere 2510 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.90

$John Deere 2510 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.10

$John Deere 2510 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.20

$John Deere 2510 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $9.10

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.30

$John Deere 2510 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $9.40

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $14.60

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.40

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.30

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $12.89

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $15.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $20.70

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $20.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $6.90

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.90

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.20

$John Deere 2510 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $13.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $16.10

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $12.60

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $59.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $15.80

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.50

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $20.10

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.40

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.40

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.10

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.10

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $255.72

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $255.72

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $124.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $39.00

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $58.00

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $57.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $113.00

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $146.00

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $96.61

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $140.00

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $52.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $374.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $21.60

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.80

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $78.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $33.00

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $61.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.80

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.00

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.70

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.80

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $79.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $27.70

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $100.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $46.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $11.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $65.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $24.50

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.40

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $62.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.10

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $23.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.70

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $66.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $194.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $323.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $286.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $46.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.80

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $180.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $435.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $16.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $49.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.70

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $301.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $105.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $72.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.70

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $121.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.47

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $59.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $69.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $71.00