FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

John Deere 3020 Tractor Parts

[Categories] [All John Deere Models] [Print]

Belts

Belt - Fan - For John Deere tractor models 3010 (Diesel), 3020 (Diesel with s/n 123000-earlier), 4000 (Gas), 4010 (Diesel), 4020 (Diesel s/n 201000-earlier), 4230 (Gas), Replaces John Deere OEM number R41681, Polyester Cord, Length: 56.25", Width: .5", (Item #: 114001) $11.30

Brakes

$John Deere 3020 Brake Pads for Disc\Rotor Type Brakes$
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Item #: 105607, Ref: AR28487) $17.50

Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R) $9.00

No
Picture
Brake Plate - 13.125 Diameter - 16 Teeth Use with Brake Shaft R49427 For 3020, 4030 (Item #: 110540, Ref: R3072) $99.00

No
Picture
Brake Valve - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999), 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999), 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number R26369, (Item #: 117229) $2.98

Planetary Brakes Clutch Pack Plate - For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission), Replaces John Deere OEM number R48236, R33872, O.D.: 11.620", I.D.: 9.700", (Item #: 117041) $36.98

Clutch

Clutch Adjusting Tool - For tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 7020. (Item #: 178693, Ref: 830602) $118.00

No
Picture
Clutch Alignment Tool - 1-1/16" 16 spline, 1-11/16" 16 spline, .67" pilot. For tractor models 2510, 3010, 2520, 3020. (Item #: 114666, Ref: S.70914) $45.00

Clutch Bearing - Release bearing for Models 1010, 2510, 2520, 3020, 40, 4000, 4010, 4020, 420 INDUST/CONST, 430 INDUST/CONST, 4320 COMPACT TRACTOR, 440 SKIDDER, 450 RIDING MOWER, 450B INDUST/CONST, 450C INDUST/CONST, 450D INDUST/CONST, 450E INDUST/CONST, 450G INDUST/CONST, 455, M, MT. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces AM3983T. (Item #: 107007, Ref: N1087) $19.80

Clutch Disc - Lined clutch disc~ remanufactured. 12 diameter, 1-1/16 hub, 16 spline, woven facings, for tractors 3010, 3020 tractor serial number 6800 and up. Replaces AR41095 and R39652. For 3010, 3020 (Item #: 111642, Ref: AR42125) $95.00

Clutch Disc, 13 - 1.250" spline diameter, 19 spline. For tractor models 3020, (4000 SN# 201000 and up), 4020, 4230, 4240, (4430 SN# 022373 and up) all with powershift. (Item #: 130097, Ref: RE29607) $322.00

Clutch Kit, Syncro-Range - Our new 12 inch, dual stage clutch kit contains: 12 inch, 6 lever, double pressure plate assembly (E153027); 12 inch, fiber clutch disc (AR42125); pilot bearing (AT23188); release bearings (AR26845 and AR41794), and clutch alignment tool. For the following tractor models with syncro-range: 3010, 3020, 500. (Item #: 171420, Ref: R31311N12K) $950.00

Clutch Lever Pin - Part number R31131 is a clutch lever pin used on John Deere models: 500, 600, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 8430 Model Year 1974-1981, 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8850, 8960 (Item #: 172865, Ref: R31131) $7.50

Clutch PTO Plate Return Spring - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 7020, Compatible with John Deere Construction and industrial models 500, 500C, 600, Replaces John Deere OEM number R26659, R48618, Sold Each, (Item #: 114093) $2.40

Inner Clutch Spring - For John Deere tractor models 1010, 1020, 2020, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), 5010, Compatible with John Deere Construction and industrial models 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 600, Replaces John Deere OEM number R26638, Sold Each, (Item #: 114092) $1.70

Pilot Bearing - .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift and synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. Replaces CH12908, JD8504, JD8511, JD9281, JD9449 (Item #: 107933, Ref: C5NN7600A) $3.70

Pressure Plate - Pressure Plate, 12", 26 spline, 1-11/16" hub. For tractor models 3010, 3020 (prior to SN# 097284). (Item #: 179548, Ref: RE153027) $714.00

No
Picture
Release Bearing - For tractor models 2510, 2520, 3010, 3020. (Item #: 121891, Ref: TP-AR41794) $25.30

Release Bearing - I.D. 2.557", O.D. 3.936", Thickness .704". For tractor models 1450, 1650, 2510, 2520, 3010, 3020, 5010, 5020, 5200, 5210, 5215, 5220, 5300, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5515, 5520, 5605, 5615, 5705, 5715, 6030, 7520. (Item #: 107477, Ref: AR26845) $34.00

Cooling System

Fan Belt - Drive belt for fan, generator and water pump. For gas: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26606R. (Item #: 114000, Ref: R41627) $10.90

Fan Belt - Drive belt for fan, generator and water pump. For dsl: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26607T. For 3010, 3020, 4010, 4020 (Item #: 123151, Ref: TP-R41628) $11.50

Radiator - For 3020 gas or diesel. Replaces R34457, AR40831. (Item #: 101758, Ref: AR46016) $444.85

Radiator Cap - For tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Item #: 125561, Ref: R27209) $21.10

Radiator Hose Lower - Hose, radiator lower. For tractors: 3010, 3020, 4000 less AC, 4010, 4020 less AC. For 3010, 4010 (Item #: 114087, Ref: TP-R26472) $17.20

Radiator Hose, Upper - For tractor models 3010, 3020, 4000, 4010, 4020. (Item #: 114089, Ref: TP-R26475) $11.30

Thermostat - 180 degree. For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, 500B, 5010, 5020, 600, 6030, 700A, 760, 760A. (Item #: 109692, Ref: R36846) $12.00

Thermostat Housing - For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020, 6030. Thermostat Housing. Replaces AR39598, AR44840, R26470, R36814, R39690, R41853, R42664 (Item #: 156639, Ref: AR44840) $63.00

Water Pump - For tractor models 3010, 3020, 4000, 4010, 4020 All Diesel without AC. Replaces casting numbers R26337, R27547, R34977, R34982, R41315, R41318, R44122. Includes: hub, backplate, pump to backplate & backplate to block gaskets. (Item #: 101903, Ref: AR45332) $115.00

Water Pump - For 3010, 3020, 4010, 4020, all Gas/LP Less Air Conditioning. Water Pump. Replaces casting numbers: R44117, R34976, R34981, R41313, R41317, R44116, R44119. NOTE: THIS PUMP WILL WORK WITH A CAST PULLEY, IF YOU ARE USING A STAMPED STEEL PULLEY IT WILL RIDE DOWN TOO FAR ON THE SHAFT AND HIT THE HOUSING. THIS PROBLEM CAN BE SOLVED BY ORDERING A SPACER, PART# R52833. (Item #: 112094, Ref: AR45330) $121.00

No
Picture
Water Pump Bearing - WATER PUMP Bearing For 3010, 3020, 4000, 4010, 4020. For the following water pumps: AR31895 and AR34856. (Item #: 180171, Ref: TP-JD9212) $16.30

Water Pump Bearing - For tractor models 3020, 4000, 4020. Used on the following water pump: AR45332. (Item #: 180675, Ref: TP-JD9355) $18.20

No
Picture
Water Pump - New - With Hub - Less Pulley For 3010, 3020, 4000, 4010, 4020, 4230 with Gas Engine (Item #: 112094, Ref: WP1483) $121.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For models 610C, 624G, 640, 640E, 640G, 644A, 644C, 646, 646B, 646C, 648E, 648G, 655, 655B, 670, 670B, 672B, 690, 690A, 690B, 690ELC, 710B, 710C, 710D, 740, 740A, 740E, 740G, 748E, 750, 750B, 750C, 755, 755A, 755B, 762A, 762B, 790ELC, 850C, 1020, 1520, 1530, 2020, 2030, 2280, 2360, 2420, 2510, 2520, 2630, 3010, 3020. (Item #: 164008, Ref: AR101549) $10.10

Decals and Emblems

Be Careful Plate - This Be Careful Plate is used on John Deere Tractors, 1961-1972. (Item #: 184329, Ref: R4475) $16.10

No
Picture
Decal Set - COMPLETE Decal Set for John Deere Model 3020. For Gas and Diesel. Includes "Diesel" decal. Not for Hydro Transmission. The numbers are dye cut vinyl. (Item #: 164900, Ref: R3780) $41.00

Hood Ornament - For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Item #: 108412, Ref: AR28047) $35.00

Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair.Replaces: AR28048, AR28049 (Item #: 101968, Ref: R2533) $164.00

Syncro-Range and Power Shift Decal Set - This Mylar set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Item #: 115031, Ref: AR52393) $49.00

Drive Train

Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 119616, Ref: R31026) $94.00

Drum, Reverse Range - For tractor models 2510, 2520, 3010, 3020, 4010, 4000, 4020. Replaces R31027, R27726 and R52499. (Item #: 124958, Ref: R52499) $82.00

Gear Shift Lever - For tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4000, 4320. Replaces R27633. (Item #: 121581, Ref: R46285) $121.00

Gear Shift Pivot - This gear shift pivot Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 5010, 5020. 6030 Tractors. It also has applications in industrial applications. It R53247, AR26360, R47203. Pivots Marked R26185 (Item #: 152195, Ref: R53247) $21.00

Pinon Gear Pin - For John Deere tractor models 3020 (s/n 122999 - earlier), 4020 (s/n 200999 - earlier), Compatible with John Deere Combine (s) CTS, CTSII, 6620, 6620 SH, 6622, 7720, 7722, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9501, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650, 9650 STS, 9750 STS, Replaces John Deere OEM number R33079, (Item #: 109728) $19.10

Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 serial number up to 015963 syncro range), (4230 syncro range up to serial number 037595). Replaces R26074, R33383. (Item #: 127291, Ref: R33383) $102.87

Shift Collar, Reverse Range - For tractor models (2510, 2520, 3020 all with syncro drive). (Item #: 156886, Ref: R33480) $101.00

Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro and quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 150072, Ref: R31028) $107.00

Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Item #: 126760, Ref: R33512) $180.00

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Item #: 110864, Ref: AR75603) $15.80

Electrical System

12 Volt Conversion Kit with Bosch Starter - This 12 volt conversion kit is for a 24 volt system with a Bosch starter. Converts 24 Volt systems to 12 Volts on gas and diesel models 3010, 3020, 4010, Kit includes: New 12 Volt starter, Alternator, bracket, battery cables and wiring, solenoid, instructions. Note: converts use to a double 12volt batteries. Replaces SE501474, TY16172. (Item #: 120547, Ref: TS-8000) $520.00

Alternator - 12 volt, 51 amp. For tractor models (6000 1975-79 with 219 dsl), (600, 600A 1973-78 with 152 dsl), (700, 734 1973-78), (3020 1969-72 with 240 gas or 270 dsl), (4020 1969-72 with 360 gas or 404 dsl), (4320, 4520, 4620 1969-73 with 404 dsl), (5020 1966-72 with 531 dsl), (6030 1970-77 with 531 dsl), (7020 1971-75 with 404 Turbo dsl), (7520 1971-75 with 531 dsl), (880 1970-80 with 180/135 gas or 202 dsl), (2250 1975-78 with 225 chrysler gas), (2270 1975-78 with 219 dsl), (2280 1975-85), (2320 1981-83 with 219 dsl/225 chrysler gas), (2420 1975-85 with 219 dsl /225 chrysler gas), (3430, 3830 1985-92). Replaces RA12NJD604. (Item #: 112112, Ref: AMO0013) $196.00

No
Picture
Alternator - Delco 24 Volt. Remanufactured with $30.00 core charge. For 3010, 3020, 4010 models with Diesel engines. ADD $30.00 Core. (Item #: 203177, Ref: TY25993) $319.30

Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Item #: 117621, Ref: SE501356) $167.00

Alternator - Motorola Style (7376) - For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, 7020, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 7722, 8820, Compatible with John Deere Harvester (s) 484, 499, 699, 7440, 9910, 9920, 9940, Compatible with John Deere Engine (s) 362, Replaces John Deere OEM number AH105520, AH80094, AH93616, TY6603, AR50909, AR52077, AH80093, Replaces Prestolite manufacturer number 110-115, 110-266, Replaces manufacturer number 10-115, 8MR2008P, 8MR2009P, 8MR2010P, 8MR2012P, 8MR2012PS, 7376, 210-145, 90-05-9063, Motorola Style, Voltage: 12, Rotation: Clockwise, Amperage: 72, Regulator: Internal, Without pulley, (Item #: 117401) $202.00

Battery Cable - Battery Cables. 300D, 3020D, 4010D, 4020D right hand. Only on diesels. 1 gauge, length 61, terminal type 1-3+. For 300D, 3020, 4010, 4020 (Item #: 172328, Ref: TP-AR26621) $45.00

Battery Cable - For tractor models 3010, 3020, 4010, 4020 left hand, only on diesels. 2 guage, length 38, terminal type 1-3+. (Item #: 173136, Ref: AR28950) $20.70

Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Item #: 115792, Ref: AR26622) $13.80

Battery Ground Strap - For tractor models 1020, 1520, 2020, 2340, 3010 diesel Std. right hand to SN# 1T19799, 3010D row util~ 3020D row util. right hand to SN# 1T67999, 4010D Std. right hand to SN# 2T20199. 2 gauge, length 7 inches, terminal type Std. (Item #: 115790, Ref: TP-AT18702) $13.00

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Item #: 164460, Ref: TP-AR54484) $37.00

Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50 (after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Item #: 105281, Ref: D4PE12029AA) $14.30

Condenser - Wico X Magneto - For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520, 3020, 3300, 4030, 6600, Compatible with John Deere Combine (s) 45, 55, 95, 105, Compatible with John Deere Harvester (s) 699, Replaces John Deere OEM number AR12013, Replaces Wico manufacturer number X5614, (Item #: 111100) $13.98

Distributor Cap - 4 Cylinder Distributor SCREW TYPE CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 1960833 (Item #: 105569, Ref: 1024914M91) $12.80

Distributor Cap - 6 Cylinder Distributor CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Item #: 105585, Ref: TP-R11271) $13.50

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $18.00

Distributor Rotor - Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Item #: 111190, Ref: 1954566) $4.10

Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt NEGATIVE ground system. (Item #: 105073, Ref: 1145A) $130.00

Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt POSITIVE ground system. (Item #: 108150, Ref: 1145AP12) $156.00

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. (Item #: 183757, Ref: 91145A) $222.00

No
Picture
Generator, Delco Type, 12 Volt - For 105, 111, 115, 145, 165, 215, 217, 248, 3010, 3020, 4010, 4020, 45, 55, 95. Replaces Delco number 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

Generator to Alternator Conversion Bracket - For John Deere tractor models 3010, 3020, 4010, 4020, For converting from generator to alternator, Bored for early models with 3/8"bolts, Will work for late models with 7/16" bolts but will need to be drilled out to fit, (Item #: 113516) $39.00

Ignition Kit, Delco Screw-Held Distributor Cap - Ignition KIT for Delco distributor with screw held cap with ROTOR For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Item #: 105278, Ref: ATK10DSR) $12.00

Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Item #: 121144, Ref: AR39505) $23.80

Key Switch, 6 Terminal - With key. For tractor models (1010 gas or LP up to SN# 51039), (2010 gas/LP up to SN# 055380), (3010 gas/LP), (3020 gas/LP up to SN# 067999), (4010 gas/LP), (4020 gas/LP up to SN# 090999). (Item #: 121145, Ref: AR26528) $36.00

Key Switch, 6 Terminal - With keys. For tractor models (3010 diesel), (3020 diesel up to SN# 67999), (4010 diesel), (4020 diesel up to SN# 909990, (5010 up to SN# 7999), 8020. (Item #: 121146, Ref: AR26557) $86.00

Light Switch, 12 Volt - 4 position, 5 terminals and fuse, .50" thread dia. For tractor models 1010, 1020, 1520, 2010, 2020, (2030 SN# up to 187300), 3010, (3020 SN# up to 067999), 4010, (4020 SN# up to 090999), 300, 301, (310 SN# up to 255718), 400, 401, (410 SN# up to 255718), (500 SN# up to 067999), (600 SN# 65000 to 90999), 760. (Item #: 125703, Ref: AR28401) $27.90

Pulley - This Pulley is used on For 12 and 24 Volt Generators on John Deere 3010, 3020, 4010, 4020, 4230, 5010, 5020 Tractors. Used with AR11302, AR34567, TY25993 and TY1447 Generators. It measures: 1.250 inches wide, 3.230 inches in diameter, 0.670 inch shaft diameter, 0.156 inch keyway. It is for 13mm (1/2 inch) wide belts. Replaces 86387, 1949916, R11189, 81-1700, GDR5001 (Item #: 119729, Ref: R11189) $16.40

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For tractor models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Item #: 164460, Ref: TPAR54484) $37.00

Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010 (1112577), 2010 (1112577), 3010 (1112577), 3020 (up to serial number 58899 and 1112577), 4010 (up to serial number 39499 and 1112581). Replaces 1905590. (Item #: 110177, Ref: 1750498M1) $4.30

Solenoid - Starter Solenoids. Solenoid assy~ base mount. services starter 1113672 on model 3020D, Serial Number 1T123000 and up~ 4030D, 4230D, Replaces Delco 1115510{D971}, AR77255. 620 (Orchard models with SN: 6223000 and up), 630, 730 (Gas and LP); 12 volt {B}. For 3020, 4030, 4230D. Replaces 1009784M91, 1017877M92, 1028587M91, AR11049, AR11050, AT11593, R11292. (Item #: 105672, Ref: 1115510) $29.20

Starter - 12 volt, 10 tooth, clockwise rotation, externally rotatable nose. For tractor models (105 1963 to 1970 with 404 diesel), (3020 1969 to 1972 with 270-4 cylinder diesel), (6602, 7700 1971 to 1974 with 404 diesel), (4000, 4020, 3020 1969 to 1972 with 404 diesel), (4030 1973 to 1974 with 329 diesel), (4230 1973 to 1975 with 404 diesel), (4320 1969 to 1973 with 404 diesel), (4430 1973 to 1975 with 404 diesel), (4520, 4620 1969 to 1973 with 404 diesel), (4630 1973 to 1975 with 404 diesel), (7020 1971 to 1975 with 404 turbo diesel). Replaces 1113656, 1113402, 1113672. (Item #: 102202, Ref: SDR0076) $360.00

Starter - 24 Volt, for Diesel Tractors 3010, 3020, 4010, 4020. Starter assembly (CW rotation 10 tooth) with solenoid for 24 volt system. Can replace original Delco 1113148. AR11138, AR28053, AR40134, SE501445, TY1470, TY2666, TY6622, TY6703, SDR0156. (Item #: 122662, Ref: 1113148) $400.00

Starter - Rebuilt Starter. Internally rotatable nose. Core Charge $80.00. For Diesel Tractors 3020 SN# 123000 and up, 4000, 4020 SN# 201000 and up, 4030, 4230, 4320, 4520, 4620, 7020. Starter Assembly with new solenoid for 12 volt system. Can replace original Delco 1113402, 1113672 and TISCO starter 83701-EX. (Item #: 203142, Ref: 1113402) $473.60

Starter - This is a 12 volt starter, clockwise rotation, 10 tooth drive, DD Delco 35MT Type. Rotatable DE housing. Note, check clearance on some JD models, may have interference issues on starter motor height when models have drop type manifold is used. For models 3010, 3020, 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320 Compact Tractor, 4430, 4440, 444C Indust/Const, 444D Indust/Const, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500A Indust/Const, 500C Indust/Const, 5400, 544C Indust/Const, 544E Indust/Const, 544G Indust/Const, 570 Grader, 570A Grader, 5720 Forage Harvester, 5820 Forage Harvester, 624E Indust/Const, 643D Feller Buncher, 644C Indust/Const, 644D Indust/Const, 646C Compactor, 690 Excavator, 690A Excavator, 690B Excavator, 693B Feller Buncher, 7020, 740A Skidder, 8430, 8440, 8450, 8640, 8650. Also replaces SE501446. (Item #: 112400, Ref: SE501444) $380.00

Starter Drive - Starter drive for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Item #: 1051682, Ref: TP-AR54992) $40.00

Starter Drive - Positork Starter Drive. For Delco-Remy starters in diesel tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 7020, 8430~Combines: 6600, 7700. Used with Delco starters 1113148, 1113190, 1113391, 1113402 For 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 6600, 7020, 7700, 8430 (Item #: 164393, Ref: TP-AR88880PT) $38.00

Starter Drive - 10 teeth. Replaces AR44700. Used with starters 1113402, 1113672, 1113391. For tractor models 180 with diesel eng., 3020 SN# 123000 and up, 4000 SN# 201000 and up, 4020 SN# 201000 and up, 4030, 4230, 4320, 4430, 4520, 4560, 4620, 6600, 6602, 7020, 7700, 8430. (Item #: 164393, Ref: AR88880) $38.00

Starter Solenoid - Starter Solenoids. Solenoid assy~ services 1113135 and 1113148 on model 3010D, 3020D, 4010D, 4020D. 24 volt {B}. For 3010, 3020, 4010, 4020 Replaces AR11138, AR28053, AR40134, AR40395, SDR6004, SE501445, TY1470, TY2666, TY6622, TY6703 (Item #: 105697, Ref: TP-AR40395) $38.00

Starter Solenoid - Solenoid for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Item #: 105696, Ref: TP-AR54991) $54.00

Starter Solenoid - Delco Starter Solenoid Assembly, flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 820, 1010, 2010, 2510, 3010, 3020, 4010, 4020 TP-AR68304 (Item #: 105675, Ref: 1047083M91) $21.70

Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Item #: 179443, Ref: AR48725) $33.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $14.40

Voltage Regulator - For tractor models (3020 with air), (4000, 4020 with air and SN# 250001-263481), (4320 with air and SN# up to 019504), (4520 with air), (4620 with air and SN# up to 014117), (5020 with air and SN# 030329 and up), (6030 with air), (7020 with air and SN# up to 002263), 350C, 350D, 355D, 450E, 455E, (544, 544A both Duboque SN# 121500 and up or Welland SN# 85200 and up), 550B, 555, 555B, (570, 570A with engine SN# 130706 and up), (644, 644A with engine SN# 280001 and up), (646 SN# up to 223644), 690, 690A, (690B SN# up to 003872), 693B, (740 with cab and SN# up to 003872), 180, 202, 303, 329DH, 329GH, 329HC, 329HF. Replaces AT29926. (Item #: 105709, Ref: AT56592) $11.80

Voltage Regulator - Voltage regulator for John Deere models 3010, 3020 up to serial number 122999, 4010, and 4020 up to serial number 2000999. Replaces Delco 1118896, 1118897, 1119000, 1119135, AR11304, and AR40170. (Item #: 105521, Ref: 121579C1) $98.00

Voltage Regulator, 12 Volt - External Voltage Regulator. 12 volt. For tractor models 3010, 3020, 4010, 4020. Replaces regulator 1118901 1119135 OR 1118896. (SUB FOR AR11304). Flat mount. (Item #: 105521, Ref: AR40170) $98.00

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Item #: 105708, Ref: AR78298) $39.00

Voltage Regulator, 24 Volt - Used on 24-Volt systems using Delco generator # 1103021 and 1103026. 3010, 4010, (3020 Diesel up to Serial Number 122999), (4020 Diesel up to Serial Number 200999), (500 Diesel up to Serial Number 67999), 5010, (600 Diesel up to Serial Number 90999), (720 Electric start diesel Serial Number 7222600 and up), (730 Electric start diesel), (830 2 cylinder Electric start), (840 Electric start up to Serial Number 8400199) Replaces: 1118292, 1118347, 1118957, 1119282, AR11008, AR30155 Flat Mount. For 24-Volt generator system, 4 terminals, 8 - 12 AMPS, works on negative or positive polarity (Item #: 105546, Ref: TP-AR30155) $182.51

Engine Bearings

No
Picture
Cam Bearing Set - Camshaft bearing kit, 3 bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not available. For 3010, 3020 (Item #: 182639, Ref: CBK-D434) $22.70

Camshaft Bearing - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (LP s/n 201000-earlier), 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8760 (s/n 500000-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 600, 644, 644A, 644B, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 700, 700A, 740, 740A, 743, 743A, 762, 762A, 762B, 790, 790D, 792, 850, 850B, 855, 860B, 862, 890, 890A, Compatible with John Deere Engine (s) 201, 227, 254 (diesel), 270 (diesel), 362, Replaces John Deere OEM number R46903, Camshaft use Item #: 108146, (Item #: 106861) $6.60

No
Picture
Main Bearing, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155963, Ref: AR74816) $9.90

Main Bearings - .010 - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a .010 oversize set. Replaces John Deere OEM nos AR74816, AR49245 (Item #: 106342) $93.00

Main Bearings - .010 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .010 oversize. Replaces AR49245, AR49238 (Item #: 106817) $103.00

Main Bearings - .010" Oversize - Set - For John Deere tractor model 3020 (s/n 123000 - later), Replaces John Deere OEM number AR49245, AR74816, Sold in complete set, Bearing Size: .010" Oversize, (Item #: 106814) $89.00

Main Bearings - .020 - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a .020 oversize set. Replaces John Deere OEM nos AR49246, AR49239 (Item #: 106812) $55.00

Main Bearings - .020 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .020 oversize. Replaces AR49246, AR49239 (Item #: 106818) $65.00

Main Bearings - .020" Oversize - Set - For John Deere tractor model 3020 (s/n 123000 - later), Replaces John Deere OEM number AR49246, AR74817, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106814, (Item #: 106815) $86.00

Main Bearings - .030 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .030 oversize. Replaces AR49247, AR49240 (Item #: 106819) $66.00

No
Picture
Main Bearing Set - Main bearing kit, standard, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77748 and 4-AR74814. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not a For 3010, 3020 (Item #: 106820, Ref: MBK1436) $103.00

No
Picture
Main Bearing Set - Main bearing kit, .010, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77750 and 4-AR74816. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 and R46430 only. TISCO supplies 4-1/4 standard bore, For 3010, 3020 (Item #: 106821, Ref: MBK1436-010) $103.00

No
Picture
Main Bearing Set - Main bearing kit, .020, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77751 and 4-AR74817. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Item #: 106822, Ref: MBK1436-020) $130.00

No
Picture
Main Bearing Set - Main bearing kit, .030, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77752 and 4-AR74818. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Item #: 106823, Ref: MBK1436-030) $98.00

No
Picture
Main Bearing Set - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a .030 oversize set. (Item #: 131573, Ref: MS-836P) $29.00

Main Bearing Set, Standard - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. Standard. Replaces AR49242, AR49243 (Item #: 106816, Ref: MBK1439) $112.00

Main Bearings - Standard - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a standard set. Replaces John Deere OEM nos AR45723 (Item #: 106811) $65.00

Main Bearings - Standard - Set - For John Deere tractor model 3020 (late gas, s/n 123000 - later), Replaces John Deere OEM number AR49243, AR74814, Engines: 241 Gas, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106815, (Item #: 106813) $61.00

No
Picture
Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Item #: 166499, Ref: AR74814) $10.70

No
Picture
Rod Bearing Pair, 010 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Item #: 106341, Ref: TP-AR46396) $14.20

No
Picture
Rod Bearing Pair, .020 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Item #: 106765, Ref: TP-AR46397) $13.50

No
Picture
Rod Bearing Pair 030 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Item #: 106766, Ref: TP-AR46398) $10.60

No
Picture
Rod Bearing, Pair STD - SINGLE Bearing. For the following 4 and 6 cylinder Gas and Diesel engines: 201, 230, 254, 381, 404. Used on the following tractors: 3010, 3020, 4010, 4020, 4320, 4520, 4620, 7020. Specify size and quantity needed when ordering. Sizes available: STD, .010, .020 or .030. (Item #: 106763, Ref: TP-AR45723) $13.40

No
Picture
Thrust Bearing Set, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up and 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 and up 6.404T/A 6 cyl eng.), (4440 with 6.466T and SN# less than 233592 and 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above and 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Item #: 155964, Ref: AR77750) $14.98

Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 and 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). Thrust washers available as part number AR77747 (Item #: 166224, Ref: AR77748) $11.98

Thrust Washer - For John Deere tractor models 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2440 (s/n 30999-earlier), 2440 (s/n 341000-later), 2510, 2520, 2550, 2555, 2630, 2640 (s/n 341000-later), 2640 (s/n 340999-earlier), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 3030, 3040 (s/n 430000-later), 3055, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999-earlier), 5020 (s/n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300B, 415B, 515B, Replaces John Deere OEM number R72507, (Item #: 113870) $31.00

No
Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 540D, 548D, 570, 570A, 610B, 640, 640 (s/n 314954 - later), 648D, 710B, Replaces John Deere OEM number R100234, R70251, R33166, R49295, R57915, R69587, (Item #: 115233) $11.90

Engine Gaskets

Conversion Gasket Set - For John Deere tractor models 3010, 3020, Compatible with John Deere Engine (s) 201, 227 (Gas), (Item #: 106958) $35.00

No
Picture
Crankshaft Seal, Front - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Item #: 106851, Ref: AR49025) $12.20

Crankshaft Seal, Rear - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T and 6.466A SN# 317859 and up), (4440 with 6.466T all and 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up and 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up and 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Replaces RE520036, RE17352, RE22764, AR63095, RE14953, RE504363, RE530121 (Item #: 106856, Ref: RE22764) $33.00

Drain Plug Gasket - For John Deere tractor models 1020, 1520, 2010, 2020, 2030, 2040, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2640, 2750, 2755, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5200, 5210, 5300, 5310, 5310N, 5400, 5410, 5500, 5510, 5510N, 6030, 6100, 6120L, 6200, 6220L, 6300, 6320, 6320L, 6400, 6420, 6420L, 6520L, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7610, 7710, 7720, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 500, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644, 644C, 644D, 644E, 644G, 646, 646C, 648E, 648G, 690B, 690C, 693B, 700A, 740, 740A, 740E, 740G, 743, 743A, 744E, 748E, 748G, 760, 760A, 762A, 762B, 770A, 770B, 772A, 772B, 790, 792, 844, 850, 855, 860B, 862, 890, 892ELC, Replaces John Deere OEM number A4827R, (Item #: 109412) $2.50

No
Picture
Front Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Item #: 106851, Ref: TP-AR49025) $12.20

Full Gasket Set - For John Deere tractor model 3020 (s/n 123000-later), Compatible with John Deere Construction and industrial model 500A, 500B, 500C, 510, Replaces John Deere OEM number AR53035, Engine: 270 Diesel, (Item #: 106938) $110.00

No
Picture
Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 3010, 3020 with 270 Diesel Engine (To Eng S#280000). (Item #: 131629, Ref: R-AR53033) $172.00

No
Picture
Head Gasket Set - For 3020 (To S#122999) with 227 Gas Engine (Item #: 106886, Ref: HS3217VY) $87.00

Head Gasket Set - For 3010, 3020 with 270 Diesel Engine (To Eng S#280000). (Item #: 106887, Ref: R-AR53032) $59.98

Main Crankshaft Seal Front - For tractor models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Item #: 121742, Ref: AT344T) $12.70

Oil Pan Gasket - Pan gasket. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 and R46430 only. For 3010, 3020 (Item #: 184606, Ref: R71917) $15.00

Oil Pan Gasket Set - This Oil Pan Gasket Set is used on John Deere: 500 (Serial number below 280000 Early Power Booster 4.270 4CYL ENG), 500A, 500B, 500C (Serial number 280000 and up 4.270 4CYL ENG), 510 (SN 280000> 4.270 4CYL ENG), 600 (Serial Number below 214999), 3010 (Gas with Block number R26150), 3010 (Serial number below 280000 4.270 4Cyl Eng and Early Power Booster Eng), 3020, 4000, 4020 (GAS Serial number below 200999). Engines: 254D, 254D, 201, 270D, 270D, 270D, 254D, 227, 241, 227 (Item #: 106911, Ref: AR30544) $17.80

No
Picture
Rear Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Item #: 106856, Ref: TP-RE17352) $33.00

No
Picture
Rear Main Seal - For model 3020 (To S#122999) with 227 Gas Engine. (Item #: 106856, Ref: SS46829) $33.00

No
Picture
Rear Main Seal - For model 3020 (From S#123000) with 241 Gas Engine. (Item #: 106856, Ref: SS46829) $33.00

Rear Main Seal - For 3010, 3020 and 3030 before SN# 280000 with 270 Diesel Engine. (Item #: 106856, Ref: R-RE22764) $33.00

No
Picture
Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Price shown is for each, sold only in multiples of 2 items. (Item #: 110545, Ref: TP-AR26480) $9.30

Upper Gasket - Valve grind set. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. Replaces AR53034, RE524092 (Item #: 106888, Ref: HS3221) $72.00

Engine Rebuild Kits

No
Picture
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 and R40840 only. Contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 standard bore For 3020 (Item #: 189522, Ref: BIFD1432) $665.00

No
Picture
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. Contains complete sleeve and piston kit with rings, pins and retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 standard bore, 3 ring piston For 3020 (Item #: 189528, Ref: BIFD2703) $686.00

No
Picture
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 and R46430 only. Contains complete sleeve and piston kit with rings, pins and retainers, connecting rod bolts, valve grind gasket set and pan gasket. For 3010, 3020 (Item #: 189633, Ref: BIFD4470) $775.00

No
Picture
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 and R40840 only. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, complete gasket set, crankshaft seals. (Item #: 130685, Ref: BEKD1432-LCB) $760.00

No
Picture
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 and up. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Order bearings separa For 3020 (Item #: 130686, Ref: BEKD2703-LCB) $760.00

No
Picture
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 and R46430 only. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, For 3010, 3020 (Item #: 189728, Ref: BEKD4470-LCB) $875.00

Cylinder Kit - For John Deere tractor models 510 (s/n 280000-later), 3020 (s/n 280000-later), 4000 (s/n 215000-335845), 4020 (s/n 215000-335845), Compatible with John Deere Combine (s) 6600 (s/n 215000-335845), 7700 (s/n 215000-335845), Compatible with John Deere Construction and industrial models 500A (s/n 280000-later), 500B (s/n 280000-later), 500C (s/n 280000-later), 510 (s/n 280000-later), 600 (s/n 215000-335845), Replaces John Deere OEM number RE23165, Order 4 or 6 for a complete engine, 6 Cylinder blocks marked R40610, R49620, R45950, R47170, R48440, 4.25" [108mm] Bore, 1.50" Piston Pin, 38mm, (Item #: 113907) $125.00

Valve Overhaul Kit - Cylinder HEAD Overhaul Kit. Contains intake and exhaust valves, springs, guides, and keys. 1 kit used in 201 CID 4 cylinder gas engine (block # R26150) and 227 CID 4 cylinder gas engine (to SN# 122999). For tractor models 3010, 3020. (Item #: 187186, Ref: VOKD227) $170.00

Engine Parts

Connecting Rod Bolt - It is important to change these any time the tension is released. This connecting rod bolt is only for connecting rods with casting number: R26047, R41423, R52285, R57303, R58880, R58882, R66922, R66923, R67320, or R71074. Check casting number before ordering. 2.484 inch long. Replaces R66452, R53290, R26325 (Item #: 113908, Ref: R66452) $3.60

No
Picture
Crankshaft - For John Deere tractor models 3010 (diesel), 3020 (diesel s/n 122999-earlier), Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 510A (all diesel), Compatible with John Deere Engine (s) 254 (diesel), 270 (diesel, s/n 280000-earlier), Replaces John Deere OEM number AR26428, Replaces Casting number R26540, R26540R, R40570, R46498, Engine: 254, 4.2 Liters, 270 (s/n 280000-earlier), 4.4 liter, 4 Cylinder, Flange: Flat, No Centering Ring, 4 Bolt Holes, 2 Dowel Holes, Snout: 1 Bolt Hole, 2 Keyways, Timing Gear Installed: L-Hand Helix, 23 Teeth, Balanced Gear Installed, R-Hand Helix, 74 Teeth, Bore: (254) 4.125" (270) 4.250", For a Remanufactured version of this sku use Item #: 102105, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102104) $3399.01

No
Picture
Crankshaft - For tractor models 3010, 500A, 3020 Diesel to replace crankshaft marked R40570, (JD500, JD500A, JD500B, 510, all Diesel to replace crankshaft marked R40570), 500 with SN# below 123113, (500B, 500C, both with SN# above 280000 with 4.270 4 cylinder engine. Crankshaft. (Item #: 102105, Ref: AR40485) $3669.01

Flywheel - With Ring Gear - 12 Square Pin Hole Style For 3010, 3020, 4000, 4010, 4020Diesel with Syncro Transmission. (Item #: 101907, Ref: R2323) $485.00

No
Picture
Flywheel Dowel Pin - This Flywheel Dowel is used with AR40565 flywheel. Three used per tractor. Replaces R40731 (Item #: 1051772, Ref: R40731) $29.50

Flywheel with Ring Gear - For tractor models JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL / SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. 82 lbs. Additional $30.00 shipping due to weight. (Item #: 101907, Ref: AR40565) $485.00

Lifter - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4450 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN and 6.466A SN <233592 and 317859> ), 4650 (6.466T W/ SN 253373>, and 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, and 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, and 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, and 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Item #: 112420, Ref: R52773) $8.30

Ring Gear - For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Item #: 103942, Ref: TP-R28811) $65.00

Ring Gear, Flywheel - For tractor models 3010, 3020, 4400, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8570. For Diesel Engines: 6404, 6466, 6359, 6068, (6.8 liter), 6076 (7.6 liter) in combines: 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9500, 9600. For diesel engines: 6404, 6466 in Forage Harvestors: 5200, 5400, 5440, 5720, 5730. Starter Flywheel Ring Gear. (Item #: 103942, Ref: TP-R28811) $65.00

Ring Gear, Flywheel - This Flywheel Ring Gear has 165 Teeth, 16.678 inch outside diameter, and 15.540 inch inside diameter. It is used on 3010, 3020, 4000, 4010, 4020, 4030, 4230, 500 Indust/Const, 500A Indust/Const, 500C Indust/Const, 510 Indust/Const, 600 Indust/Const, All with GAS or LP Engines. Replaces original part number R26054 (Item #: 121929, Ref: R26054) $106.00

Thrust Washer - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T/A 6cyl eng.), (4430 SN# 335845 and up 6.404T/A 6cyl eng.), (4440 6.466T SN# 253372 and less and 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up and 6.466A SN# 317859 and up 6cyl eng.) (Item #: 168002, Ref: AR77747) $15.50

Topshaft Clutch Disc Kit - For John Deere tractor models 2010, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230 (s/n 037595-earlier), 4320, 4430 (s/n 066737-earlier), Replaces John Deere OEM number RE37119, All with Syncrorange Transmission, Kit contains of 2 plates and 3 discs. 7520 calls for 3 plates and 4 discs (order 2 kits)., (Item #: 117082) $45.00

No
Picture
Valve, Exhaust - 4 used in 201 CID 4 cylinder gas engine (block number R26150) and 227 CID 4 cylinder gas engine (to serial number 122999); 6 used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870, to serial number 200999). For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 108876, Ref: R42420) $18.30

No
Picture
Valve, Exhaust - For tractor models 3020, 4000, 4020, 4040, 4230, 4320, 4520, 4620, 7020. (Item #: 156103, Ref: TP-R43679) $14.50

No
Picture
Valve, Exhaust - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161171, Ref: R44175) $12.70

Valve Guide, Intake and Exhaust - 8 used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only), 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 12 used in 381 CID 6 cylinder diesel engine; 12 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 4 items. Change quantity once in cart to match your specific needs. (Item #: 166170, Ref: R28654) $4.80

No
Picture
Valve, Intake - 4 used in 201 CID 4 cylinder gas engine (block # R26150) and 224 CID 4 cylinder gas engine (to SN# 122999); 6 used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870 only, to SN# 200999). For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in mulltiples of 2 items. Once in cart, change quantity for your specific needs. (Item #: 167383, Ref: R26109) $8.98

Valve, Intake - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 161172, Ref: R44174) $13.90

Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Item #: 121443, Ref: T20129) $4.30

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - 6 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 and R40870 only. TISCO supplies 4-1/4 standard bore 4 ring piston. For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 166241, Ref: R30929) $20.30

No
Picture
Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 163383, Ref: R30939) $5.20

No
Picture
Piston Sleeve - For tractor models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Item #: 167276, Ref: R32050) $52.00

No
Picture
Sleeve and Piston Kit - 4 1/4 Bore. For tractor models 3020 (To S#122999) with 227 Gas Engine. (Item #: 184553, Ref: R3441) $768.00

No
Picture
Sleeve Assembly - 4 1/4 Bore with Replacement Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910 (Item #: 166765, Ref: R-RE23170) $150.00

No
Picture
Sleeve Assembly (4 Required) - 4 1/4 Bore with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385 (Item #: 128722, Ref: R-RE23173) $152.00

No
Picture
Sleeve Assembly (4 Required) - 4 1/4 Bore with Power Booster Pistons For 3020 with 270 Diesel Engine (From Eng S#280001) (Item #: 167391, Ref: R-RE23160) $94.00

Exhaust System

Chrome Curved Exhaust Stack 24 Inch - Double Walled, 24" Tall, 2 15/16" Flared I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 179459, Ref: R4264) $364.00

Chrome Stack, Curved - 36" double wall, 2-15/16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 179017, Ref: R5114) $470.00

Chrome Stack, Straight - 36", double wall, 2-15/16" flared inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 179019, Ref: R4887) $523.00

No
Picture
Chrome Stack, Straight - 48", double wall, 2-15/16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 114833, Ref: R4888) $533.00

No
Picture
Chrome Straight Exhaust Pipe - Double walled, 24" Tall - 2 15/16" Flared I.D. - 5" O.D.. For 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Item #: 180717, Ref: R4263) $352.00

No
Picture
Exhaust Stack - 2-15/16" FL X 48", Curved Chrome - For John Deere tractor models 3020, 4000, 4010, 4020, 4030, 4230, 4240, Inlet I.D.: 2-15/16" FL, Length: 48", John Deere Flared Inlet, Curved Stack - Black Finish use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114827) $180.00

Exhaust Stack - Curved Chrome - For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel), Style: Curved, Flared Inlet To Fit Manifold, O.D.: 5", Length: 38", Inner Liner, Chrome Plated, Straight Stack W/Liner use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115074) $300.00

Exhaust Stack - Straight Chrome - For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel), Style: Straight, Flared Inlet To Fit Manifold, O.D.: 5", Length: 38", Inner Liner, Curved Stack use Item #: 114772, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115075) $250.00

Manifold - For gas models:3010, 3020. Gaskets NOT included. (Item #: 101604, Ref: TP-R27404R) $155.00

Muffler - Vertical muffler~ round body. 2-15/16 inlet inside diameter~ 2-5/8 exhaust outside diameter~ 26 body length~6 body diameter. For tractor models: 3010 gas, 3010 diesel to engine serial number 6643, 3020 gas to tractor serial number 122999. For 3010, 3020 (Item #: 101187, Ref: TP-AR26786) $75.00

Muffler - Vertical muffler~ oval body. Flared~ 2-1/4 exhaust outside diameter~ 27 body length. For tractor models: 3020 diesel tractor serial number 123000 and up, 4000 and 4020 diesel tractor serial number 201000 and up, 4030, 4040, 4230 diesel. For 3020, 4000, 4020, 4030, 4040, 4230 (Item #: 101190, Ref: TP-AR86595) $82.00

Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 5/8 Overall Length - 26 For 3010, 3020, 4000, 4010, 4020Gas and LP Gas3010 (To S#6643), 4010 (To S#7026)Diesel. OEM# AR26786, Use R1756 Clamp, Use R1804 Rain Cap (Item #: 101187, Ref: R1081) $75.00

Muffler - Vertical Exhaust Inlet Flared, Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4230 Diesel. OEM# AR86595, Use R2051 Clamp, Use R1801 Rain Cap and AR46323 Clamp. (Item #: 101190, Ref: R1085) $82.00

Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4230Gas. OEM# Use R1756 Clamp, Use R1801 Rain Cap. (Item #: 101191, Ref: R1675) $95.00

Muffler Clamp - Used with Mufflers R1083 and R1085, this two piece muffler clamp is used on the following John Deere models with flared muffler inlets: 4020, 500, 3010, 3020, 4000, 4010, 4030, 4230, 500A, 510, 570B, 570A, 4040, 4240, 4440. Replaces part numbers AR46323, DR-300, R32235 (Item #: 114772, Ref: AR46323) $19.30

Muffler Clamp Seal - For John Deere tractor models 2840, 2940 (s/n 452124-later), 2950, 2955, 3010, 3020, 3030, 3040 (s/n 452124-later), 3050, 3055, 3120, 3130, 3140 (s/n 452124-later), 3150, 3155, 3350, 3640, 4000, 4010, 4020, 4030, 4050, 4230, 4240, Replaces John Deere OEM number R227500, R31142, Gasket Between Muffler And Manifold, (Item #: 113524) $7.60

Muffler, Vertical - Oval body. Inlet 2-15/16 inch inside diameter, outlet 2-1/4 inch outside diameter, 27 inch overall length. For tractor models: 3020 gas serial number 123000 and up, 4000, 4020 gas serial number 201000 and up, 4230. (Item #: 101191, Ref: TP-AR41172) $95.00

Fuel System / Air Intake

Adjustable Load Needle - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off 90 degrees from the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 2.417 inches overall length, 1/2 - 20 thread size. (Item #: 112230, Ref: C71-59DC) $22.98

Adjustable Load Nozzle Assembly - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off opposite of the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 1.965 inches overall length, 1/2 - 20 thread size. Replaces AR46109, H21058, R13069, R13070, AR13029 (Item #: 112231, Ref: AR46109) $29.98

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794) $9.70

Carburetor - This New carburetor replaces Marvel Schebler USX21, USX31, USX36, USX49sl, and Zenith numbers 12510, 12879, 13429, 14429, 14990, 15099. Mounting bolt spacing is 3-5/16 inches. Assembled in USA, 1 year warranty. (Item #: 104096, Ref: R3020) $760.00

Carburetor Float - For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Item #: 108455, Ref: AH10620) $26.80

Carburetor Float Valve - Viton needle float valve. For Models: 500, 500A, 600, 3010, 3020, 4010, 4020 using USX Marvel Schebler. Also substitute for AR10105R. Replaces AR10114, AR10105. Used on Marvel Schebler carburetors. (Item #: 190748, Ref: AR10114V) $10.70

Carburetor Gasket Set - Used on carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For 3010, 3020, 4010, 4020. (Item #: 182911, Ref: CGK41) $6.60

Carburetor Kit, Basic - Kit for Zenith 12510, 13429, 12879, 13320, 13450, 13430 carbs on 3010, 3020, 4020. John Deere Carb: AR34243, AR45161, AR45162, AR52450, AR55368 (Item #: 100743, Ref: Z106) $41.00

Carburetor Kit, Complete - For Zenith Carb#: 12510, 12879, 13429, 14990 (4-Cyl JD Only), 15099 (4-Cyl JD Only), 15107 - Includes Basic Kit, plus Fuel and Air Adjusting Screws and Jets. (Item #: 184574, Ref: R8300) $103.00

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Zenith Carb#: 12510, 12879, 14990 (4-Cyl JD Only), 15099 (4-Cyl JD Only), 15107. The kit contains all the parts shown. (Item #: 184529, Ref: R8302) $242.00

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit Zenith Carburetor Number 13429. The kit contains all the parts shown. (Item #: 184532, Ref: R8304) $276.00

Carburetor Long Jet Nozzle - For John Deere tractor models 3010, 3020 (s/n: 122999-earlier), 4010, 4020 (s/n: 200999-earlier) Replaces John Deere OEM number R10220, AR10102, AR39831, , Compatible with Minneapolis Moline tractor models G900, G1000 Replaces Minneapolis Moline OEM number 10P3214, , Compatible with Oliver tractor models 90, 1750, 1755, 1800, 1850, 1855, 1900, Replaces Oliver OEM number 156663A, For Marvel Schebler Carburetor number USX29, USX32, USX37, USX44, USX21, USX31, USX35, USX36, USX49, USX20, USX30, USX33, USX40, USX45, USX47, USX48, Length: 2-1/4" (2.25"), For short (1-3/4") jet nozzle use Item #: 111920, (Item #: 113814) $42.98

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: USX20, USX21, USX30, USX31, USX35, USX36, USX48. For the following tractor models: 3010, 3020, 4010, 4020. Add $75.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 1532-CARB) $599.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12510, 12879, 13320, 13429, 13430. For the following tractor models: 3010, 3020, 4010, 4020. The Center-to-Center measurement on the mounting bolts is 3 3/8 inches. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203300, Ref: 1534-CARB) $370.01

Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX21, USX31, USX36, USX49SL. Tractor manufacture carburetor numbers AR34242R, AR28636R. For tractor models: 3010, 3020. For 3010, 3020 (Item #: 121871, Ref: BK372V) $46.00

No
Picture
Choke Shaft Assembly Cast Zenith Deere - For John Deere tractor models 500, 600, 3010 (s/n 049999-earlier), 3020, 4000 (s/n 201000-later), 4010, 4020, Compatible with John Deere Construction and industrial models 500 (s/n 123113-earlier), Replaces John Deere OEM number AR13026, Zentih 13429, 13430, (Item #: 118739) $179.00

Fuel Filter - Fuel filter element, cartridge type, for diesel tractors with dual filters. 0.750 inches inside diameter, 3.371 inches outside diameter, 4.122 inches tall. Models: 70, 730, 4020, 600, R, 80, 720, 820, 830, 3010, 3020, 4000, 4010, 840, 4520, 5020. Replaces AR28611, AR344R, AR44077 (Item #: 110869, Ref: TP-AR44077) $16.90

Fuel Filter - Fuel filter element, spin-on type, for diesel tractors with dual filters. Models: 3020, 4020, 5010, 5020. (Item #: 111143, Ref: TP-AR45097) $15.10

Fuel Injector - For tractor models JD 3010, 3020, 4010, 4020 model tractors. Verify stamped number before ordering: Stamped number - Roosa Master: 17705, 18270, 18646, 18767, 20364, 20494. Replaces AR39811, AR46846, AR50781, SE501163. (Item #: 109653, Ref: AR50781) $37.00

Fuel Injector - Nozzle, Injector. Pencil-type injector For tractor models 840, 940, 1020, 1030, 1040, 1129, 1139, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2840, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3350, 3640, 4020. Replaces: AT25502, AT30299, AR49877, AR56290, AR73673, AR88239, AT18064, SE500822, SE500823, ROOSA # 22202. (Item #: 113965, Ref: AR89564) $32.00

Fuel Injector Boot, Pack of 12 - This is a fuel injector leak off boot. It is used on multiple John Deere diesel models. 1 used per injector. Price is for 12 boots. Replaces R34765 (Item #: 114213, Ref: R34765) $18.10

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Item #: 140647, Ref: TP-RE42211A) $27.50

Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3/8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Item #: 112524, Ref: TP-RE42211B) $25.90

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $15.60

No
Picture
Fuel Tank - For tractor models 3010, 3020. POLY TANK. (Item #: 103946, Ref: AR39586) $530.00

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Item #: 172673, Ref: AT20911) $10.00

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. For Gas tractors : 1520, 2030, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030. (Item #: 180105, Ref: RE42211RK) $27.20

Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Item #: 111144, Ref: AR50041) $22.60

Grommet, Fuel Filler, Black - For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diameter, and 3 1/2 inch diameter on underside lip. (Item #: 109934, Ref: A5157R) $12.00

Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R) $21.10

No
Picture
Injector, Pencil (New) - For JD 3010, 3020, 4010, 4020 model tractors. (Item #: 113965, Ref: ARB9564) $32.00

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R) $28.30

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $15.30

Throttle Knob - Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Item #: 125658, Ref: R26670) $5.90

Gauges

Fiber Optic Lead - This fiber optic lead is 8 inches long. It is used on the following tractors with side console: 2520, (3020 Serial Number 12300 and up), 4000, (4020 Serial Number 201000 and up), 4520. Replaces original part number AR48016 (Item #: 124181, Ref: AR48016) $35.00

Fuel Gauge - This fuel gauge is for 12 Volt NEGATIVE Ground Systems Only, Gas or Diesel. For 2 inch outside diameter opening, 1 1/2 inches thick gauge housing. It is 30 To 250 OHM Rating. Used on the following: 2520, (3020 serial number 123000 and up), (4020 serial number 201000 and up), 4320, 4520, 4620, (500A serial number 123114 To 152141), 500B, (5020 serial number 025000 and up), 6030, 7020, 7520; Replaces: AR45436, AT375294 (Item #: 108062, Ref: AT375294) $42.00

Fuel Gauge, 12V - This Fuel Gauge is 12 Volt Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. Housing depth is 1.205 inches. (Item #: 155405, Ref: R34262) $41.00

Fuel Gauge, 12V - 12 Volt Positive ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to Serial Number 122999), 4010, (4020 up to Serial Number 200999), 5010, (5020 up to Serial Number 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Positive Ground or it will not work and damage the gauge. (Item #: 160956, Ref: R34262P) $41.00

No
Picture
Fuel Sending Unit - Fuel Tank Sending Unit for tractor models (3020 Serial number 123, 000 and up), (4000 and 4020 serial number 201, 000 and up), 4320 and (Industrial 600 serial number 201, 000 and up). (Item #: 115547, Ref: AR46268) $55.00

Fuel Sending Unit - This fuel sending unit fits the following tractor models: 500 (Gas serial number 67999 and below), 860 and 860A (serial number 001000 and below), 3010, 3020 (serial number 122999 and below), 4010, 4020 and 600 (serial number 200999 and below). Replaces part number AR26434. (Item #: 115030, Ref: AR26434) $47.00

Tachometer Cable - 33" long. For tractor models 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Item #: 159054, Ref: AR26721) $28.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Item #: 117361, Ref: RE206853) $114.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121304, Ref: RE206854) $126.00

Tachometer With White Needle - This tachometer with white needle has provision for fiber optic light and illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853. (Item #: 121302, Ref: AR50404) $116.00

Tachometer With White Needle - This tachometer with white needle has a provision for fiber optic light and illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121626, Ref: AR50405) $156.00

No
Picture
Transmission Oil Pressure Gauge - JD Power Shift Transmission Pressure Gauge for JD 600 Industrial, 500, 2510, 3020 up to SN # 122999, 4020 up to SN # 200999, 500A up to SN # 123113 Replaces: R34259. Measures 2.030 inches OD and 1/8 inch NPT male thread. (Item #: 160955, Ref: R34259) $40.00

Transmission Oil Temperature Gauge - For tractor models 2510, (3020 up to SN# 122999), (4020 up to SN# 200999). (Item #: 108065, Ref: R34258) $46.00

Transmission Oil Temperature Gauge - For tractor models (3020 SN# 123000 and up), (4020 SN# 201000 and up), 4320, 4520, 4620. (Item #: 108063, Ref: AR46979) $50.00

Water Temperature Gauge - For tractor models 2520, (3020 SN# 123000 and up), 4000, (4020 SN# 201000 and up), 4320, 4520, 4620, 7020. (Item #: 108064, Ref: AR48640) $38.00

Water Temperature Gauge - This water temperature gauge has a 29inch lead. Max temperature is 250 degrees and minimum is 100 degrees. It has no provision for fiber optic light. It has a 2.045 inch housing diameter and a 2.324 inch bezel diameter. Fits John Deere - [ 2510, 5010 (For Gas and Diesel through 1968) ], 3020 (For gas and Diesel through 1968 (up to SN: 122999)), 4020 (For gas and Diesel through 1968 (up to SN: 200999)), 5020 (For Gas and Diesel through 1968 (up to SN: 024999)); Replaces: AR36383, R34263 (Item #: 108061, Ref: R34263) $44.00

Hitch / Drawbar

Cable - Shift Control, AR39677, R33318 - For John Deere tractor models 3020 (With Power Shift s/n 122999-earlier as transmission shift control cable), 5010, 5020, 6030 (as PTO control cable), Replaces John Deere OEM number AR39677, R33318, Length: 41", (Item #: 114690) $137.00

Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 and 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Item #: 121854, Ref: R81576) $140.00

Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 and 2.310 and 4.360 and 7.050 and 9.050 and 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. (Item #: 110260, Ref: RE20662) $162.00

Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Item #: 121855, Ref: AR27599) $44.00

Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728) $19.70

Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503) $6.40

Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189) $37.00

Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $7.10

Front Pull Arm, LH - Left Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110985, Ref: AR32548) $264.00

Front Pull Arm Pin - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, (Item #: 114090) $11.50

Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110986, Ref: AR32547) $329.00

Leveling Link Adjusting Shaft - Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Item #: 111630) $55.00

Lift Arm Adjusting Handle - Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Item #: 110130) $25.70

Lift Link, Adjustable - Works on either RH or LH side. For tractor models 3010, 3020, 4010, (4020 SN# up to 200999). (Item #: 110250, Ref: AR44555) $511.00

Lift Link Knuckle - Used on John Deere Tractor 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. Replaces AR26691, Marked R26612 (Item #: 121856, Ref: AR26691) $65.00

Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Item #: 110577, Ref: R26611) $100.00

No
Picture
Lift Link Rod - For tractor models 3010, 3020, 4010, (4020 up To S#200999). (Item #: 110577, Ref: R3115) $100.00

Lift Link Seal - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26616, Inside Diameter; 1", Outside Diameter: 1.503", (Item #: 110138) $7.70

No
Picture
Load Control Shaft - Shaft is 20.937 inches long and 1 inch diameter. For tractor models 500, 2510, 2520, 3010, 3020, 4030. (Item #: 128555, Ref: R33883) $105.00

No
Picture
Load Control Shaft Bushing - Bushing with O-Ring. For tractor models 500, 2510, 2520, 3010, 3020, 4030. Also available in oversizes .003, .006 and .030. State size required in comments section of order form if oversize is required. 2 required per tractor. (Item #: 113995, Ref: R27018_) $16.00

Load Control Shaft Seal - 2 Seals required per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Item #: 115050, Ref: AR27371) $7.00

Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558) $8.60

Lower Lift Link Housing Yoke - For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26615, (Item #: 110512) $160.00

Pull Arm Latch - For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Item #: 108518, Ref: AR90082) $58.00

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570) $160.00

Rockshaft - For tractor models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Item #: 172658, Ref: R56175) $264.00

Rockshaft Control Cable - For tractor models 2510, 3010 and early 3020 before SN# 122999. (Item #: 114691, Ref: AR26810) $93.00

Rockshaft Cover Shield - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 154194, Ref: R41663) $25.60

Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Item #: 108936, Ref: R3139) $66.00

Sway Block, LH - This Left Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. Replace R39513 (Item #: 108936, Ref: R39513) $66.00

Sway Block, RH - This Right Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. It Replaces R39512 (Item #: 108937, Ref: R39512) $56.00

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $13.00

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.70

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.70

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.90

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

Top Link - Complete Top Link, Cat I tractor end, Cat II implement end. Eylet size is 3/4 inch at Bracket end, 1 inch at working end. Color is JD green. 21 Inch minimum and 30 Inch maximum reach. For tractor models 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2650, 2850, 3020. Replaces AL39170, AL67290. (Item #: 102057, Ref: AL39170) $58.00

No
Picture
Toplink Assembly - For John Deere tractor models 3020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4000 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4020 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4040 (s/n 002862-earlier), 4050 (s/n 001000-later), 4230 (using rear tires 18.4-38 / 20.8-34 / 23.1-30), 4240 (s/n 006627-earlier), 4250 (s/n 006136-later), 4255, 4430, 4455, Replaces John Deere OEM number AR34209, AR50643, AR61659, R51524, R42495, Link Ends Have 1 3/8" Thread, Front Link End Has 1" Pin Hole, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102056) $182.00

Top Link Ball, Category I - This is a Category I Ball for a 2 inch socket and 3/4 inch pin. It is used with AR34208 top link. Replaces F2680R (Item #: 121860, Ref: F2680R) $7.10

Top Link Ball, Category II - This is a Category II Ball for a 2 inch socket and 1 inch pin. It is used with AR34208 top link. Replaces F2681R (Item #: 111379, Ref: F2681R) $4.98

Top Link End - Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Item #: 110204, Ref: AR46298) $101.00

Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Item #: 114007, Ref: R53762) $5.90

Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 114099, Ref: R40557) $7.30

Hydraulic System

Break-Away Coupler Overhaul Kit - For John Deere tractor models 1020, 1520, 1530, 1640, 2010, 2020, 2030, 2040, 2040S, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3040, 3140, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Replaces John Deere OEM number AR82570, (Item #: 115326) $17.50

Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Item #: 114098, Ref: R34362) $15.30

Hydraulic Coupler Conversion Kit - For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2130, 2140, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3020, 3030, 3040, 3130, 3140, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8630, 8640, Replaces John Deere OEM number RE206778, RE12121, Converts John Deere remote couplers to ISO/Pioneer style couplers, (Item #: 115903) $185.00

Hydraulic Lever Guide - 2 piece. For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320, 4520, 4620, 6030, 7020, 7520. Replaces R41760. (Item #: 108182, Ref: R41194) $63.00

Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Item #: 165242, Ref: AR94660) $1129.01

Hydraulic Pump - Hydraulic Pump has 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 5/8 Right Inlet, 1 1/16 inch Discharge. Verify measuerments before ordering. It is used on 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 300 Indust/Const, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 500 Indust/Const, 5010, 600 Indust/Const, 9950 Cotton Picker, 9960 Cotton Picker, 9965 Cotton Picker, 9970 Cotton Picker. It replaces AR39168, AR90459, AR97872, R39695 (Item #: 114592, Ref: AR97872) $1019.01

No
Picture
Hydraulic Pump - For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760, Replaces John Deere OEM number AR101807, R101807, Top Inlet: 7/8", Right Inlet: 1-5/8", Discharge: 1-1/16", Left Inlet: 1-1/16", 50cm, 3.0ci, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal, For a Remanufactured version of this sku use Item #: 200413, (Item #: 115599) $1009.01

Hydraulic Pump Drive Coupler - For 3020, 4000, 4020, 5010, 5020. Hydraulic Pump Drive Coupler. (3068R) (Item #: 108933, Ref: R34359) $66.00

Hydraulic Pump Inlet Valve - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 4240, 4250, 4255, 4320, 4430, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number AR53301, 2.4 cu. in. Serialized and Non-Serialized, 3 cu. in. Serialized and Non-Serialized, 4 cu. in. Serialized and Non-Serialized, (Item #: 113886) $31.00

Hydraulic Pump Packing - For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s/n 767516-earlier), 3010 (s/n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 7445 (s/n 275483, 4.219 engine), Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s/n 123113-earlier), 500A (s/n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s/n 123113-earlier), 844, 860, 860A, 862, Compatible with John Deere Engine (s) 6359T, 6466D, 6466T, Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483, 4.219 engine), Replaces John Deere OEM number R26149, (Item #: 113996) $2.30

Hydraulic Pump Piston - For John Deere tractor models 1550, 1750, 1830, 1850, 1950, 2030, 2040, 2140, 2250, 2450, 2650, 2850, 3020, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650, 4000, 4010, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4440, 4450, 4455, 4520, 4620, 4630, 4640, Replaces John Deere OEM number R27150, (Item #: 113877) $11.60

Hydraulic Pump Seal and O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Item #: 114400, Ref: RE29107) $99.33

Hydraulic Pump Seal and O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Item #: 113864, Ref: RE29103) $61.00

Hydraulic Pump Stroke Control Valve - For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Item #: 113888, Ref: RE10712) $46.00

Selective Control Valve - Return and pressure valve. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2955, 3020, 3055, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630. Replaces AR78396. (Item #: 116161, Ref: AR86535) $24.90

Selective Control Valve Cover Plate - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4030 (s/n 12617-earlier), 4230 (s/n 27854-earlier), 4320, 4430 (s/n 44904-earlier), 4630 (s/n 16902-earlier), 8430 (s/n 001740-earlier), 8630 (s/n 002452-earlier), Replaces John Deere OEM number AR41969, AR54331, AR71188, Replaces Casting number R41445, R50066, R59081, R60334, (Item #: 111438) $133.00

Selective Control Valve Cover Plate - Triple - For John Deere tractor models 2520, 3020 (s/n 123000-later), 4000, 4020 (s/n 201000-later), 4030 (s/n 12617-earlier), 4230 (s/n 27854-earlier), 4320, 4430 (s/n 44904-earlier), 4630 (s/n 16902-earlier), 8430 (s/n 001740-earlier), 8630 (s/n 002452-earlier), Replaces John Deere OEM number AR71189, Replaces Casting number R41448, R50067, R59084, (Item #: 111439) $316.00

No
Picture
Selective Control Valve Lever - For John Deere tractor models 2520, 3020, 4000, 4020, 4320, 4520, 4620, Replaces John Deere OEM number AR40991, (Item #: 115456) $145.00

Stroke Control Valve Filter Element - For John Deere tractor models 1830, 2030, 2130, 2350, 2440, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640, Compatible with John Deere Construction and industrial models 300, 300B, 302, 302A, 310, 400, 401, 410, 410C, 440, 440A, 440B, 440C, 444, 500, 500B, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644, 644A, 644B, 644C, 646, 646B, 670, 670A, 672, 672A, 700, 700A, 740, 760, 760A, 770, 770A, 772, 772A, Replaces John Deere OEM number R27173, (Item #: 113880) $7.50

Upper Lift Housing - For tractor models 3010, 3020, 4010, 4020 (To S#200999). (Item #: 179941, Ref: R26613) $119.00

Lights

No
Picture
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Item #: 118520, Ref: S.51140) $5.10

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $14.00

Dash Light - 12 Volt - For tractor models 50 up to SN# 5016122, 60 to SN# 6017060, 70 Highcrop to SN# 706327, 520 to SN# 5208099, 1010, 2010, 2510, 3010, 3020 to SN# 122999, 4010, 4020 to SN# 200999, 5010, 5020, 6030, 8020. (Item #: 105319, Ref: AD2835R-12V) $17.80

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1) $5.40

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $37.00

Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250) $26.50

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $9.30

Light Clamp - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 435, (2010 crawler), 3010, 3020, MI. (Item #: 126557, Ref: M1482T) $9.50

Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Item #: 123453, Ref: T12443) $45.00

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Item #: 123454, Ref: R27460) $13.60

Light Switch - 4 position, 9 terminal, .50 inch thread dia. For tractor models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), 4000, (4020 SN# 91000 - 250000), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Item #: 113307, Ref: AR41288) $26.90

Light Switch, 4 position - 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Item #: 121802, Ref: AR48724) $24.40

No
Picture
Light Switch, 4 Position - 8 terminal, uses AT65316 knob. For tractor models (3010 diesel), (3020 diesel SN# 67999-122999), (4010 diesel), (4020 diesel SN# 65000-90000), (5010 up to SN# 4499), 8020. (Item #: 125704, Ref: AR28402) $38.00

Light Switch Knob - Use with AR48724 light switch. For tractor models (2520, 2750 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4030, 4230, 4320, (4520 from SN# 142450 and up), 4620, 4630, (5020 with cab). Replaces AR54445. (Item #: 126563, Ref: R46092) $12.40

Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Item #: 150646, Ref: AA925R) $21.80

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.20

Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Item #: 105346, Ref: AR77326) $67.00

Miscellaneous

No
Picture
Arm - For John Deere tractor models 1020, 1030, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 349999-earlier), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2240 (s/n 350000-later), 2255, 2350, 2355, 2355N, 2440 (s/n 340999-earlier), 2440 (s/n 341000-later), 2520, 2550, 2555, 2630, 2640 (s/n 340999-earlier), 2640 (s/n 341000-later), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3020 (s/n 123000-later), 3030, 3040 (s/n 430000-later), 3055, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 (s/n 024999-earloer), 5020 (s/n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number R62652, (Item #: 117332) $22.80

Bearing Cone - For John Deere tractor models 70, 70 (Diesel), 1640 (sn:430000-later), 1830, 2030, 2040 (sn:430000-later), 2040S (sn:430000-later), 2130, 2140 (sn:430000-later), 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (sn:765516-earlier), 3010, 3020, 3030, 3040 (sn:430000-later), 3055, 3130, 3140 (sn:430000-later), 3150, 3155, 3255, 4000 (sn:201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300B, 415B, 515B, Replaces John Deere OEM number JD8192, Replaces Timken manufacturer number 3872, (Item #: 113891) $37.00

Bearing Race - For John Deere tractor models 1640 (Europe, s/n 429999-earlier), 1640 (s/n 430000-later), 1830, 1840 (Europe, s/n 429999-earlier), 2040 (Europe, s/n 429999-earlier), 2040 (s/n 430000-later), 2040S (Europe, s/n 429999-earlier), 2040S (s/n 430000-later), 2130, 2130 (Hydrostatic FWD), 2140 (Europe, s/n 429999-earlier), 2140 (s/n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3030 (Hydrostatic FWD), 3040 (Europe, s/n 429999-earlier), 3040 (s/n 430000-later), 3130, 3130 (Hydrostatic FWD), 3140 (Europe, s/n 429999-earlier), 3140 (s/n 430000-later), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R45874, (Item #: 113878) $35.00

Brake Valve Overhaul Kit - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 ('74 - '81), 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 540, 540A, 570, 570A, 600, 670, 670A, 672A, 700A, 760, 770A, 772A, Replaces John Deere OEM number AR30687, AR31946, (Item #: 115353) $37.00

Cab Foam Floor, Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (for use with open deck with side console), Color: Black, Kits are computer cut to assure accuracy, (Item #: 112930) $125.00

Cab Foam Floor Mat - Hinson Cab - Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Factory Hinson Cab), Color: Black, Kits are computer cut to assure accuracy, (Item #: 112924) $140.00

No
Picture
Cab Foam Floor Mat - Year-A-Round Cab - Black - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Year-A-Round Cab), Color: Black, Kits are computer cut to assure accuracy, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112927) $232.00

Cab Foam Kit - 7-Piece - Black For tractor models with Hinson Cab. (Item #: 112923, Ref: R3247) $337.00

Guide - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 5010, 5020, Compatible with John Deere Construction and industrial models 300, 400, 440, 440A, 440B, 500, 500 (Series A, s/n 123113-earlier), 500A (s/n 123114-152141), 540, 540A, 544, 544A, 570, 570A, 600, 644A, 700, 700A, 760, Replaces John Deere OEM number R27157, Guide for Four Piston Hydraulic Pump, (Item #: 118794) $18.98

No
Picture
Hammer Strap - Offset For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630 (Item #: 180088, Ref: R3102) $146.00

No
Picture
Hammer Strap - Straight. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630. (Item #: 109873, Ref: R3103) $85.00

No
Picture
Hydraulic Pump Shaft 2.4 - For John Deere tractor models 1640 (Europe, s/n 429999-earlier), 1640 (s/n 430000-later), 1830, 1840 (Europe, s/n 429999-earlier), 2030, 2040 (Europe, s/n 429999-earlier), 2040 (s/n 430000-later), 2040S (Europe, s/n 429999-earlier), 2040S (s/n 430000-later), 2130, 2140 (Europe, s/n 429999-earlier), 2140 (s/n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040 (Europe, s/n 429999-earlier), 3040 (s/n 430000-later), 3130, 3140 (Europe, s/n 429999-earlier), 3140 (s/n 430000-later), 4010, 4030, 5010, Replaces John Deere OEM number R39843, 14 Spline, Used in 39CC (2.4 Cubic Inch) pump, Additional Handling and Oversize Fees Apply To This Item, (Item #: 117724) $83.00

No
Picture
Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 109374, Ref: R3058) $215.00

No
Picture
Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 108910, Ref: R3059) $402.00

Roller Bearing - For John Deere tractor models 1640, 1830, 2030, 2040, 2040S, 2130, 2140, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5103, 5203, 5303, 5403, 5415, 5415H, 5425, 5615, 5625, 5715, 5715HC, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644A, 644B, 646, 646B, 700A, 760, 760A, Replaces John Deere OEM number R27145, (Item #: 113887) $0.60

No
Picture
SCV Operating Arm - For John Deere tractor models 2520, 3020 (s/n 123000-later North American Edition), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4320, 4520, 4620, Replaces John Deere OEM number R41122, (Item #: 115144) $55.00

SCV Remote Valve End Cover - For John Deere tractor models 940, 1010, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2510, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4010, 4020, 5010, 5020, 7020, 7520, Compatible with John Deere Combine (s) 2240, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number R49186, (Item #: 112299) $28.50

Oil System

Oil Cooler - Hydraulic - For John Deere tractor models 3010 (s/n 049999-earlier), 3020 (Syncro all, Powershift s/n 109411-later), 4000 (s/n 250001-later), 4020 (s/n 250001-later), Replaces John Deere OEM number AR44283, For tractors with separate oil coolers, The application information is based upon the original configuration of the tractor as it was new from the factory. While the serial number will tell you what the tractor came out with originally, many models have already been updated, therefore make sure you know the style of cooler you are dealing with prior to purchasing. Additionally some minor modifications may be necessary when mounting these components on some models. However, these modifications are the same as would be necessary when using genuine OEM parts., (Item #: 109704) $547.00

Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Item #: 109417, Ref: AR26350) $13.53

Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 powershift row crop and standard. (Item #: 160551, Ref: AR32393) $176.00

Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. (Item #: 160555, Ref: AR32588) $146.00

Oil Line, Rear LH, Outer - Dual selective control. For model 3020 up to SN# 122999 powershift row crop or standard. There is an addtional $15 shipping for this part due to the size of the package. This will be included in the shipping total of the order. (Item #: 160552, Ref: AR32394) $175.00

Oil Line, Rear LH, Outer - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. (Item #: 160556, Ref: AR32589) $143.00

Oil Line, Rear RH, Inner - For model 3020 up to SN# 122999 syncro Row crop and Std. Due to the size of this part, there is $25 addtional shipping. This will appear as part of the shipping total of your order. (Item #: 160554, Ref: AR32587) $82.98

Oil Line, Rear RH, Outer - For model 3020 up to SN# 122999 syncro row crop and standard. (Item #: 160553, Ref: AR32586) $107.98

Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Item #: 121439, Ref: AR27977) $10.66

No
Picture
Oil Pump Drive Gear - Late style without keyway. FOr Models: 3010, 3020, 500, 500A, 500B, 500C, 4000, 4020, 4010, 600, JD600, JD500, JD500A, JD500B, 6600, 7700. (Item #: 156260, Ref: R45134) $220.00

PTO / Driveline

No
Picture
Bearing Race - Replaces JD10283. Inside diameter is 1.181", outside diameter 1.602", width is .748". For tractor models 3120, 300, 301, 400, 401, 500, 600, 1020, 1120, 1520, 2020, 2030, 2120, 2140, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450 and 4455 (Item #: 111372, Ref: JD7557) $12.00

PTO Disc - For John Deere tractor models 3010, 3020, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number RE29610, AR26840, Size: 10", Hub: 1-11/16", Spline: 26, Center: Solid, Type: Woven, For a Remanufactured version of this sku use Item #: 205874, (Item #: 114017) $103.00

PTO Drive Reduction Gear - This 540 Rpm PTO Drive Gear fits John Deere Models: 2840, (3020 serial number 123000 and up), 4000, (4020 serial number 201000 and up), 4030, 4040, 4050, (4055, 4255, 4440, 4450, 4455 all QUAD and POWER SHIFT), 4230, 4240, 4250, (4320 SYNCRO), 4430; Replaces John Deere Part Number R42014 (Item #: 121745, Ref: R42014) $277.00

PTO Guide - Used on John Deere 301, 500, 600, 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455. Replaces John Deere OEM numbers R38220, R70960, R72046, R45126 (Item #: 121740) $77.00

PTO Shaft - The new 1000 RPM PTO shaft is 10.875" long with 21 Splines. Fits John Deere 2510, (3020 Up to Serial Number 122998), (4020 Up to Serial Number 200998). Replaces R33342 (Item #: 109361, Ref: R33342) $161.00

PTO Shaft - 540 RPM - 6 Splines 10.687 Long For tractor models 2510 (From S#10491), 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4255, 4320, 4430, 4440, 4450. Replaces AR41752, R41756 (Item #: 108507, Ref: AR41752) $110.00

PTO Shaft - 1000 RPM - 21 Splines 10.875 Long For tractor models 2510, 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Replaces OEM R38224 (Item #: 108935, Ref: R3088) $96.00

PTO Shield - For 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4455. PTO Shield. (Item #: 104094, Ref: R33348) $39.00

Shaft, PTO (540 RPM) - This is a 540 RPM shaft to replace 1000 RPM standard shaft. Fits tractor models 500A (IND), 500B (IND), 500C (IND), 600 (SN 201000>), 2510, 2520, 3020 (SN 123000>), 4000, 4020 (SN 201000>), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Dimensions: 11.840" long, 6-spline. (Item #: 121487, Ref: R38224SP) $213.00

Shaft, PTO (540 RPM) - Does not include JD7557 Bearing Race. Fits 500, 500A, 600, 2510, 3020 (SN <-122999), 4020 (SN <-200999). Dimensions: 10.687" long, 6-spline. (Item #: 111774, Ref: AR41753) $124.00

Seats

Seat Back - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. Replaces AR59680-6, AR59680, R34268 (Item #: 109267, Ref: R0183) $222.00

Seat Bottom - This is only the Seat Bottom in Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Item #: 109266, Ref: R0182) $171.44

Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket and (1) R31513 LH seat bracket. (Item #: 108180, Ref: SBK400) $31.00

Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. Used SBK400 Bracket Set, not included. The bottom cushion in this set is 3 1/2 inches thick. Replaces R34618, R34619, R34620, TY26545 (Item #: 109348, Ref: JD5678) $290.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Upper Back - This is only the Upper Back Piece in Yellow Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Item #: 109265, Ref: R0184) $55.00

Sheet Metal / Body Parts

4th Step - For John Deere tractor models 2840, 2950, 2955, 3010, 3020, 3040, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 109570) $93.00

Battery Box - Left - This left side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Replaces AR20210, AR26617, AR34819, AR40208, AR40674. Battery box comes primed. (Item #: 104080, Ref: JTBL-1WB) $56.00

Battery Box, LH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104080, Ref: AR40208) $56.00

Battery Box, RH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard SN# 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: AR40207) $62.00

Battery Box, RH - For tractor models 2520, (3020 serial number 123000 and up), (4000 Row crop serial number 201000 and up), (4020 Row crop serial number 201000 and up), 4320, 4520, 4620. All less cab and JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: AR40673) $62.00

Battery Box - Right - This right side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Battery box comes primed. Replaces Replaces: AR10209, AR26618, AR34185, AR40207, AR40673. (Item #: 104079, Ref: JTBR-2WB) $62.00

No
Picture
Battery Box, Right Hand Side - Right Hand with Stamped Steel Tray For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 Row Crop Models without Cab. OEM# AR34185, AR40207, AR40209, AR40673. Needs left hand side to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104079, Ref: R0161) $62.00

No
Picture
Battery Hold Down - For tractor models: (3010, 4010 standard), (3020, 4020 Row-Crop with cab and standard), 4000, (4320, 4520, 4620 Row-Crop with cab). (Item #: 163483, Ref: AR26469) $64.00

Cab Foam Kit - With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab. (Item #: 112925, Ref: R1235) $413.00

Extend-A-Step - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep, Comes primered (color may vary). Prior to painting check fitment, To be used with left hand step kit use Item #: 113386, (Item #: 110137) $86.00

Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103964, Ref: R70588) $108.00

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103958, Ref: RE13879) $240.00

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab and sound guard body. Tractors: 530, 630 gp (SN# 6300000 and up), 730G&D GP (SN# 7300000 and up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103957, Ref: RE13878) $240.00

Fender - Flat Top, RH Side, With Hand Hole - For 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces OEM RE13878. Rubber Hand Hole Grommets available as part number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127011, Ref: AR48872) $328.00

Fender U-Bolt - This Fender U-Bolt is used on John Deere (2010 Rowcrop Utility; SN: 42001 and up), 2010 Rowcrop, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. It Replaces original part number R26992 (Item #: 103965, Ref: R26992) $13.55

Frame Rail, LH - For tractor models 3010, 3020. OEM# AR65369. (Item #: 103857, Ref: AR65369) $477.00

Frame Rail, RH - For tractor models 3010, 3020. OEM# AR65368. (Item #: 103856, Ref: AR65368) $410.00

Front Grill Screen - For 3010, 3020. Replaces OEM# AR26494. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104085, Ref: R0176) $103.00

No
Picture
Handrail - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Easy to install with no holes to drill and hardware is included, Durable green powder coat finish, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step kit use Item #: 114447, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114445) $77.00

Hood - Round Exhaust Hole - Replaces John Deere OEM nos AR41148, AR26564. This hood has round exhaust hole and is without air stack hole. Used on John Deere 3010, 3020 serial number 122999 and earlier. For a hood with air stack hole order 179011. Additional $60.00 shipping due to weight. (Item #: 135050) $604.00

Platform - Does NOT have dimmer switch hole. For tractor models 2520, (3020 row crop and high crop from SN# 123000 and above), (4000 row crop and high crop from SN# 201000 and above), (4010 row crop from SN# 001000 and above and Standard From SN# 020200 and above), (4020 row crop and high crop from SN# 201000 and above and syncro range from SN# 065000 to 090999), (4320 row crop). Replaces AR40672, AR48004. (Item #: 116933, Ref: AR48727) $255.00

Rear Side Shield - Left Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26851. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101947, Ref: R0456) $95.00

Rear Side Shield - Right Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26850. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101946, Ref: R0457) $90.00

No
Picture
Rear Side Shield - Left Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101949, Ref: R1536) $87.00

No
Picture
Rear Side Shield - Right Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101948, Ref: R1537) $85.00

Rockshaft Cover, LH - With tool box. For tractor models 2520, (3020 from serial number 123000 and up), 4000, (4020 from serial number 201000 and up), 4320. (Item #: 110688, Ref: AR40817) $151.00

Rockshaft Cover, RH - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 108517, Ref: AR41599) $144.00

Rockshaft Cover without Tool Box - Left Hand - For John Deere tractor models 2520, 3020 (s/n 201001-later), 4000, 4020 (s/n 201001-later), 4320, Replaces John Deere OEM number AR40817, Fits Left Hand Side, Tool Box Not Included, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For 3 piece set less tool box use Item #: 110688, (Item #: 108516) $194.00

Rockshaft Support - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Item #: 108520, Ref: R41231) $54.00

Side grill panel - Side grill panel, for tractors: 3010, 3020, two (2) used per tractor. For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101933, Ref: TP-AR26849) $89.58

No
Picture
Side Moulding - With Decal - Right Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1525) $140.00

No
Picture
Side Moulding - With Decal - Left Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 118577, Ref: R1526) $140.00

No
Picture
Side Panel, Front, Left - For tractor models 3010, 3020. (Item #: 101965, Ref: AR26498) $125.00

No
Picture
Side Panel, Front, Right - For tractor models 3010, 3020. (Item #: 101964, Ref: AR26497) $125.00

No
Picture
Side Screen - 19 x 18 For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101933, Ref: R0168) $89.58

Step Adapter Bracket - Left Hand - For John Deere tractor models 1010, 1020, 2010, 2020, 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Fits left hand side, For use on equipment less cab, Easy to install with no holes to drill and hardware is included, For Step Unit - Left Hand use Item #: 113386, (Item #: 108978) $77.00

Step Adapter Bracket - Right Hand - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, Compatible with John Deere Hay Cutting (s) 2420, Fits right hand side, For use on equipment less cab., Easy to install with no holes to drill and hardware is included, Comes primered (color may vary). Prior to painting check fitment, For a Right Step Unit use Item #: 114447, (Item #: 114446) $77.00

No
Picture
Step Kit - Left Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (row crop and utility tractors), Replaces John Deere OEM number RE62856, Open tread design for better slip resistance, Kit Includes: handrail, steps, side panels, and mounting bracket, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, To Create a 4th Step use Item #: 150801, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108122) $325.00

Step Pad - For tractor models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Item #: 109589, Ref: F3195R) $35.00

No
Picture
Step Unit - For John Deere tractor models 3020, 4020, 4320, 4520 (all with Hinson cab), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114451) $370.00

No
Picture
Step Unit - Early Hiniker Cab - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with early Hiniker cab or Stolper cab less Power Shift), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114450) $220.00

Step Unit - Late Hiniker Cab - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with Hiniker cab late cab only where original steps mount with 4 bolts directly under the door), Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Left Hand Rail use Item #: 109570, (Item #: 114448) $426.00

Step Unit - Left Hand - For John Deere tractor models 2420 (Open station row crop and will require adapter bracket), 2510 (Open station row crop and will require adapter bracket), 2520 (Open station row crop and will require adapter bracket), 2950, 3010 (Open station row crop and will require adapter bracket), 3020 (Open station row crop and will require adapter bracket), 3030, 3040, 3130, 3140, 3150, 3155, 4000 (Open station row crop and will require adapter bracket), 4010 (Open station row crop and will require adapter bracket), 4020 (Open station row crop and will require adapter bracket), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4260, 4320 (Open station row crop and will require adapter bracket), 4350, 4430, 4440, 4450, 4455, 4520 (Open station row crop and will require adapter bracket), 4555, 4560, 4620 (Open station row crop and will require adapter bracket), 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all other with Sound Guard cab), Fits left hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Handrail shown is sold separately, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 113386) $190.00

No
Picture
Step Unit - Right Hand - For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all row crop with open station), Fits right hand side, Convenient adjustable step unit makes it easier to get in and out of your tractor, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide 6" deep mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Optional 4th Step use Item #: 110137, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114447) $230.00

Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103952, Ref: R27883) $41.00

Weight Bracket - For John Deere tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020 (s/n 122999-earlier), 3040, 3140, 3150, 3155, 3340, 3540, 3640, 4020 (s/n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 4960, 5020, 6030, 6100D, 6105D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603, 7200, 7200R, 7210, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7400, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8450, 8560, 8650, 8760, 8850, 8960, Replaces John Deere OEM number R117599, AR72132, Weight: 128 lbs, Width: 20", Bolt Hole Centers: 14" and 3", Holds 10 of item no. 119703, Holds 14 of item no. 119704, Holds 14 of item no. 119702, 3/4"x 2" Bolts Required, (Item #: 119693) $200.00

Weight - Suitcase, Front - For John Deere tractor models 1020, 1450, 1520, 1530, 1550, 1650, 1750, 1850, 1950, 2020, 2030, 2040, 2150, 2155, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4055, 4230, 4240, 4255, 4320, 4430, 4455, 4520, 4620, 4630, 5020, 5045, 5045D, 5045E, 5055, 5055D, 5055E, 5065M, 5070M, 5075, 5075E, 5075M, 5080M, 5083, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101, 5103, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5625, 6030, 6105M, 6105R, 6115M, 6115R, 6125, 6125M, 6125R, 6130, 6130R, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6210, 6210R, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7200, 7300, 7400, 7500, 7700, 7800, Compatible with John Deere Hay Cutting (s) 2360, Replaces John Deere OEM number R51680, Weight: 100 lbs, Made For Most 5000 Series Utility Tractors, Thickness: 2", (Item #: 119703) $133.00

Steering

Axle Center Tube - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Replaces original part number AR50865 $100 will be added for shipping due to size/weight of part. (Item #: 108906, Ref: R0009) $1439.01

No
Picture
Axle, Front Housing Clamp - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number AR30154, Replaces John Deere Casting number R27809, Front Axle Housing and Pivot Bracket Clamp, (Item #: 119444) $103.00

Complete Wide Axle Assembly - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 450 lbs. (Item #: 108907, Ref: AR44331) $3099.01

Complete Wide Axle Assembly, Heavy Duty - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly - HEAVY DUTY. Includes all framing, tie rod and spindles. This part ships via truck freight. Please call for pricing and ordering. (Item #: 110954, Ref: AR44331H) $3419.01

No
Picture
Front Axle Assembly, Wide, Heavy Duty, without hubs - For JD 3010, 3020, 4000, 4010, 4020. Schwartz Complete Axles and mounting Parts WITHOUT HUBS. These Heavy Duty Models do not include hubs and bearings. Use original hubs and bearings from narrow front axle. The Heavy Duty Models are especially adaptable for use with flotation tires. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 300 lbs. (Item #: 120004, Ref: 22770) $4119.01

Front Axle Housing Lock Bolt - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, (Item #: 108966) $23.70

Front Axle Housing with Bushings - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Front Axle Housing with Bushings. Used on AR44331 and AR44331H wide front ends. (Item #: 108906, Ref: AR50865) $1439.01

Front Axle Mounting Plate Wedge - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number R49098, (Item #: 109528) $43.00

Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Item #: 123964, Ref: AR44333) $550.00

Knee Extension - Knee Extension. Used with Ar55180 spindle. Dimensions A-3.250 inch B-18.000 inch C-12.750 inch For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900 tractors (Item #: 109374, Ref: AR50962) $215.00

Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Item #: 110032, Ref: AR44333KN) $359.00

Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Item #: 108910, Ref: AR50963) $402.00

Pivot Bolster - Use R3064 Pin. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping due to weight. (Item #: 110737, Ref: R3063) $540.00

Pivot Pin - Used front and rear, 4.375" long, 1.500" dia. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Item #: 108967, Ref: R27817) $41.00

Pivot Plate - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Pivot plate with caps and bolts. (Item #: 110737, Ref: AR69836) $540.00

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Item #: 113859, Ref: R34348) $60.00

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Item #: 113860, Ref: R79152) $42.98

No
Picture
Spindle - Spindle, Right Hand or LH, for row crop tractors with adjustible front axles. This later production style spindle has a 5/8 diameter hole for steering arm bolt. Early production spindles with 3/4 diameter hole are no longer available. Check bolt/hole size befor For tractor models 2510, (2520 SN# 022001 and up), 3010, 3020, 4000, 4010, 4020, 4320 (Item #: 102218, Ref: TP-AR55180) $160.00

No
Picture
Spindle - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020 (All with Schwartz Front Axle), Replaces John Deere OEM number 3997, Vertical Length 13-3/8, Shaft Diameter 1-5/8, Spindle Diameter 1-5/8, Seal diameter 2.375", 6 Spline Spindle, Inner Bearing diameter 1.688", Outer Bearing diameter 1.3115", Requires 1 inch fine threaded nut, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108820) $275.00

Spindle - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, Vertical Length: 13-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Seal Diameter: 2.375", Inner Bearing Diameter: 1.688", Outer Bearing Diameter: 1.3115", (Item #: 108957) $335.00

Spindle - Spindle, LH/RH. Dimension A-10.750 inch B-1.50 C-1.687 D-1.312 For 4000, 4230, ALL Low Profile. 3010, 3020, All Row Crop Utilities. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102222, Ref: AR50983) $270.00

Spindle - Spindle, LH/RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001 and up. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 104778, Ref: AR50981) $205.98

Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 108046, Ref: A877R) $15.00

Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 110031, Ref: AR44333SP) $307.00

$John Deere 3020 Spindle, RH\LH$
Spindle, RH/LH - Measures A= 15.125", B= 1.500", C= 1.687", D= 1.312". For tractor models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102218, Ref: AR55180) $160.00

Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Item #: 108047, Ref: A890R) $6.60

$John Deere 3020 Splindle, RH\LH$
Splindle, RH/LH - Spindle, LH/RH. Dimensions A-12.750 inch B-1.50 inch C-1.687 inch D-1.312 inch. Fits 3010, 3020, 4000, 4010, 4020 All with Standard non-adj. front axle. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Item #: 102221, Ref: AR55179) $173.00

Steering Arm - For John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number 2381, (Item #: 111425) $118.00

Steering Arm, Center - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900. (Item #: 102703, Ref: R27808) $111.00

Steering Arm, LH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Item #: 102705, Ref: R47766) $51.00

Steering Arm, RH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Item #: 102704, Ref: R47765) $49.00

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875) $60.00

Steering Wheel - 16" diameter, 7/8" splined hub, smooth finish, like original. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 4320, 4520, 4620, 5010, 5020, 6030, 7030, 7520. Uses cap for 2-7/16 inch opening. (Item #: 101447, Ref: AR26625) $49.00

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $67.00

Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101457, Ref: R26673) $61.00

Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Item #: 101456, Ref: JDS338) $70.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.90

Tie Rod - Tie rod end, outer threaded, Left hand threads, 3-7/8 to center of post. For fixed front axles on tractors 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320. For 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104880, Ref: TP-AR27430) $22.40

Tie Rod Assembly - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 Inch LENGTH ON INNER TIE ROD TUBE. Contains AR51584, AR27351, R28021, R28022, R28023, R28024 plus hardware. (Item #: 102252, Ref: AR44332) $90.00

Tie Rod Assembly - For tractor models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 Inch LENGTH ON INNER TIE ROD TUBE. (Item #: 104871, Ref: AR44334) $119.00

Tie Rod End - Tie rod end, outer, 7/8-18 threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Item #: 104865, Ref: TP-AR27351) $16.00

Tie Rod End - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Item #: 104866, Ref: TP-AR51584) $31.00

No
Picture
Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Item #: 104870, Ref: R3830) $73.98

Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R3042) $34.00

Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Item #: 104868, Ref: R28021) $34.00

Tie Rod Tube - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Replaces John Deere OEM number R28022, 11.500" Long, Small inner tube, (Item #: 104869) $23.60

Tie Rod Tube - Left Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle), Replaces John Deere OEM number R28115, Fits Left Hand Side, 19.375" Long, (Item #: 104879) $79.00

Tie Rod Tube - Right Hand - For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle), Replaces John Deere OEM number R28114, 16.500" Long, Right Hand Tie Rod Tube, (Item #: 104878) $95.00

Wheels

10" x 15" Front Rim - Yellow - For John Deere tractor models 1020, 1520, 2030, 2440, 2630, 2640, 2750, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, Width: 10", Diameter: 15", Holes: 6, Back Side: 5.500", (Item #: 103761) $267.00

No
Picture
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: 2788) $17.00

Bearing Cone - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179943, Ref: 3383) $78.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Item #: 169912, Ref: M88048) $11.20

No
Picture
Bearing Cone - Inner bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: TP-JD7222) $17.00

Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Item #: 179943, Ref: TP-JD7224) $78.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Item #: 173107, Ref: JD8913) $13.00

No
Picture
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Item #: 173107, Ref: 25577) $13.00

Bearing Cup - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179944, Ref: 3320-TIM) $15.00

Bearing Cup, Inner - For tractor models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179944, Ref: TP-JD7270) $15.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $25 shipping due to weight. (Item #: 103764, Ref: FW60156) $116.00

Front Wheel Bearing Kit - Wheel bearing kit. For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. Kit Contains: 25521 (Cup), 25577 (Cone), M88010 (Cup), M88048 (Cone), AR26480 (Seal), R26632 (Seal Retainer), . Repairs one wheel. (Item #: 102229, Ref: FW157S) $47.00

Front Wheel Felt Retainer - The Felt Retainer is used with FW109S wheel bearing kit. 3.160Inch Diameter OD, 3.086 Inch ID, Thru hole 2.06 Inch Diameter, Outer ring Diameter 3.654 Inches, 1.115 Inch Overall height. Measure Before Ordering. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179278, Ref: D635R) $22.30

No
Picture
Retainer - Retainer. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 180109, Ref: TP-B89R) $24.90

Spindle Dust Shield - For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2693R, 4020KR, Used with AR50962 and AR50963 knees, (Item #: 110385) $12.80

Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577 (Cone), 25521 (Cup), M88048 (Cone), M88010 (Cup), 23342 (Seal), R26632 (Seal Retainer). (Item #: 102229, Ref: WBKJD6) $47.00

Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 or WBKJD7 (depending on spindle), WB916 Bolts and hub cab A1555R. (Item #: 102237, Ref: R48763) $56.00

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref: A1555R) $14.30

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $352.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $103.00

Decals and Emblems

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.80

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $42.00

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $23.90

Electrical System

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $113.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $12.80

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $58.00

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $53.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $23.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.70

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.60

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere 3020 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $8.00

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $77.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $115.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $113.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $156.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $140.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $180.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $116.00

$John Deere 3020 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.80

$John Deere 3020 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.90

$John Deere 3020 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.10

$John Deere 3020 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.20

$John Deere 3020 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $9.10

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.30

$John Deere 3020 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $9.40

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $14.60

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.40

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.30

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $12.89

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $15.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $20.70

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $20.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $6.90

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.90

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.20

$John Deere 3020 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $13.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $16.10

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $12.60

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $59.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $15.80

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.50

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $20.10

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.40

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.40

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.10

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.10

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $255.72

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $255.72

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $124.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $39.00

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $58.00

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $57.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $113.00

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $146.00

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $96.61

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $140.00

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $52.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $374.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $21.60

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.80

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $78.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $33.00

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $61.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.80

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.00

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.70

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.80

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $79.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $27.70

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.10

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $100.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $46.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $11.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $65.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $24.50

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.40

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $62.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.10

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $23.90

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.70

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $66.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $194.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $323.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $286.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $46.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.80

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $180.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $435.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $16.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $49.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.70

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $301.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $105.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $72.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.70

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $121.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.47

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $59.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $69.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $71.00